Question about Canon imageRUNNER 400S Copier

1 Answer

Ihave canon 400 problems. e051, e901, e805 problems frequently please suggest me

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,219 Answers

Hello,
by the look at your problems:

E051 - Horizontal registration sensor problems
E001 - Fixing temperature faulty
E805 - The Fan rotation problems

It can be that You have problems with DC contoller ( main pcb ) or the copier is in worst condition and there are faults on every segment.

For E001, you can try to reset error:

1. The following error codes cannot be reset by merely turning off and then on the main power.
They require resetting in service mode:
E000, E001, E002, E003, E004, E032, E717
1) Start service mode, and select COPIER>FUNCTION>CLEAR>ERR.
2) Press the OK key.
3) Turn off and then on the main power.
2. Error codes other than the above may be reset by turning off and then on the main power.
n Detail Code
Some error codes offer detail codes, which may be checked in service mode:
COPIER>DISPLAY>ERR (3rd block from the right)



BUT I THINK THAT THE BEST SOLUTION IS TO CALL SERVICE TO RECTIFY THE PROBLEM OR YOU BUY NEW MACHINE:..

Hope that helps!

Posted on Jul 22, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ihave canon ir 400 machine but thats no worked. machine displayed error cod E805 .sir please give me sugestation


E805The stoppage of the exhaust fan is detected, or a failure in rotation of the fan is detected. (iR/GP400 or later machines)The detail code, which can be checked with DISPLAY,
You can try to clean up the fan

Apr 14, 2018 | Canon Office Equipment & Supplies

1 Answer

Error code e051


the horizontal registration home position detection mechanism has a fault

May 01, 2014 | Canon imageRUNNER 400 Printer

2 Answers

Error e805 ir 400


my cannon ir400 xerox machine is on but no working power supply is full but not run machine

Dec 21, 2013 | Canon imageRUNNER 400S Copier

1 Answer

Can the E051 error message be fixed by someone other than a technician. On a Cannon Image Runner 400/330 series. I tried finding the upper right side sensor that should have long white plastic teeth


Someone who is not a technician can only do the following:
1. disconnect the souter and detarche it from the machine.
2. E051 means the souter ias not functioning properly discopnnect and the problem is gone while you look for the technician to repair your souter.

Jul 12, 2011 | Canon imageRUNNER 400S Copier

2 Answers

How to solve E051 error please guide me...my machine is canon ir 400, problem started immediatly after starting the machine, i cleared the error by pressing addl fn+2+8&addl.fn but it didnt solve it....


This is failure of the horizontal registration motor. I've had to replace this motor and it's a very involved process. This is the very small motor located just above the paper pick-up assembly. If you're not a qualified tech then let a tech take care of it for you. You have to remove several covers, P/U assembly, and other things to get to it.

Jun 27, 2011 | Canon imageRUNNER 400S Copier

3 Answers

Error 805 and 803


Hello sir; The error code you display 803 & 805 could be come from same problem, both all are composite board 24 volt supply problem, replace composite board will take care this problem. good luck.

Jul 24, 2009 | Canon imageRUNNER 400S Copier

4 Answers

Canon ir 400 photocopier


i have ir400 in my machine. first e805 code has been displayed and after that it shows that to load paper. then after e803 code is displayed. please help

Jun 03, 2009 | Canon imageRUNNER 400S Copier

1 Answer

I HAVE PROBLEMS WITH ON AN READ E901


E901 - Pedestal Motor Signal not generated. Please check the motor diver on the pedestal unit.

Apr 18, 2008 | Canon NP 6050 Copier

Not finding what you are looking for?
Canon imageRUNNER 400S Copier Logo

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2279 Answers

Ekse

Level 3 Expert

13434 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...