Questions & Answers for: 50 8 fuser

Ad

Question about HL 1430 Laser Printer

1 Answer

...50 is a fuser unit fault code. You can take apart the fuser unit and see if the fuser lamp is functional. Also check some of the other thermal parts on the fuser. If everything checks out, you will ...

Ad

Question about LaserJet 4 plus Printer

3 Answers

...1522nf . I get the message " 50.2 Fuser error, Turn off and Then on"I do it but print is not good. 1/4 to 3/4 is bad print. Print is not strong and can be errased by rubbing with finger. ...

Ad

Question about LaserJet 2840 All-In-One Printer

3 Answers

...50.1 Fuser is hot. What is a fuser? My hp laser jet 3500 is showing an error message in the dispaly window. It says "50.1 Fuser Error. Fuser is hot. Press both sides of fuser to ensure it is fully ...

Question about LaserJet 4 plus Printer

1 Answer

...50 Service error is a fuser error. Turn the printer off for 5 to 10 minutes, then turn it back on. If the error is still there, I think your going to need to make a service call you can try reseating ...

Question about LaserJet 4 plus Printer

1 Answer

...50 service. I cant get into menu. wont do anything Hi Sheila, The following page gives the reason http://www.all-laser.com/cgi-bin/webc.cgi/error50.html Seems the printer needs something called a ...

Question about LaserJet 4m plus Printer

1 Answer

...turn over the printer, it appear error 50 on screen, and can not start the printer, please help.... thanks. Error 50 will be a faulty fuser unit or DC controller board. Try replacing the fuser

Question about : HP4 Laserjet Printer

1 Answer

...50. To replace the fuser just open the door on the back of the printer, inside you will see the fuser, unscrew the 2 screws and pull the old one out. Insert the new fuser and screw it down, power on ...

Question about X5150 All-In-One InkJet Printer

1 Answer

...50 service code" same could be said about the lexmark fuser malfunction replacining a fuser can be expensive might be better to get another printer unless you have a special bond like me i find ...

Question about LaserJet 4 plus Printer

1 Answer

...50 intervenire X FUSER ERROR A fuser error has occurred. 1. Turn the printer off, wait 10 minutes, and then turn the printer on. 2. If the message persists, reseat the fuser. If that does not work, ...

Question about LaserJet Pro P1102

1 Answer

50.0 fuser error Hi, SOLUTION: Follow the steps listed below: Turn the printer off and unplug it for 30 minutes; then turn the power back on. Try a different power cord. DO NOT use extension cords to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...