Questions & Answers for: agitator bolt

Ad

Question about WPRB9220D Top Load Washer

1 Answer

...and when you look down the agitator, you will see a 10mm stainless steel bolt. You will need to remove this bolt to remove the agitator. If there is no bolt, try pulling the agitator up and

Ad

Question about Ultimate Care II LSQ9549L Top Load Washer

2 Answers

...cheap fix and easy repair.pop the top off agitator,you will see 1 bolt inside center of agitator,take out bolt and pull agitator.pull agitator apart and in the top part you will see 4 plastic

Ad

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...dogs. First, How do I get to the bolt to loosen it and lift out of machine, please? Thanks, remove top of agitator remove plastic cap inside agitator housing. remove 7/16 in. bolt. lift out ...

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...not to turn bolt too hard- sometimes the bolt is seized where it goes into top of gearbox, and if you turn bolt too hard, you can break the bolt. Once bolt is removed, agitator just pulls straight ...

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

bolt that goes into the agitator. This fixes the problem for a while. Pretty soon the agitator stops moving.This bolt doesn't stay tightened. This assumes that you have a basic Kenmore / Whirlpool top

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...bolt.turn top agitator upside down and feed holder and dog's up in top agitator.holding socket and exstention in top agitator,rotate top agitator down holding dog's and holder in with socket and ...

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

bolt out but agitator will not release appears to be frozen onto shaft. replaced bolt and left loose tapped bolt head with drift as agitator was lifted without success Had to cut agitator away leaving

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...agitator bolt comes loose - does it need loctite? I was asked by a friend to have a look at her Simpson Encore 605. The agitator wasn't agitating on the wash cycle. It turned out the bolt ...

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...top load agitators have centre bolt on them and it is special bolt inside agitator and you must use proper socket with extension to reach bolt and holed agitator with one hand when tithing the ...

...Agitator Bolt 1/4" Square Allen bolt won't Undo just Turns( shaft turns with it maybe ) *Agitator Doesn't have Slot/ Holes down the Sides maybe wrong Agitator ?? You will have to hold the shaft ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...