Questions & Answers for: agitator dogs

Ad

Question about Ultimate Care II LSQ9549L Top Load Washer

2 Answers

...agitator dogs are worn and need to be replaced. To do this remove the agitator cap and the bolt that holds down the agitator. With the bolt out you can remove the top section of the agitator (auger) ...

Ad

Question about Ultimate Care II LSQ9549L Top Load Washer

2 Answers

agitator dogs. If neither half are working, you might be having transmission issues. To change the dog kit, re,ove the top cap on the agitator and locate a 7/16" bolt. Remove the bolt and the agitator

Ad

Question about 24032\24036 Top Load Washer

1 Answer

...agitator dogs in agitators have only been used for the past 15 or so years. sounds like you need to take the agitator out and replace the 4 dogs in the top of the agitator. not a costly

Question about 24032\24036 Top Load Washer

1 Answer

...agitator to replace the dogs? remove the fabric softner assemble.if ther is a plastic cover remove it remove 1/2 bolt and reach down under agitator up. put agitator on the floor.put a foot on both ...

Question about 24622 Top Load Washer

1 Answer

...agitator dogs will come out on your palm. Pay attention to how the agitator dogs are installed. Remove the worn agitator dogs and install the new ones. If the agitator dogs are not worn, check the ...

Question about 24622 Top Load Washer

1 Answer

...agitator dogs inside the top of the agitator, they are bad for wearing out, sometimes the agitator may only agitate one way when the dogs are worn out. This is an instruction sheet that came with the ...

Question about 24622 Top Load Washer

1 Answer

Agitator dogs are worn out. These are what grab the agitator and agitates the clothes. The dogs have fine teeth and are worn easily if the washer is overfilled or off balanced. The top of the agitator

Question about RAX4232KQ Top Load Washer

3 Answers

...agitator dogs) this will give you a better view at what you are looking at. If this is a Whirlpool manufactured top loader, the problem may be a worn agitator cam assembly, worn agitator dogs, loose ...

Question about RAX4232KQ Top Load Washer

1 Answer

...the agitator, bottom is fitted to transmission shaft. You pop the top cover, remove the 7/16 bolt and both halves together to change dogs of agitator. Pull halves apart to change dogs. Fairly

Question about RAX4232KQ Top Load Washer

1 Answer

...agitator dogs check THE CAM DOGS INSIDE THE AGITATOR, AS THEY WILL HINDER THE AGITATION PROCESS. However in G.E models the cam dogs are replaced with what is called an agitator coupler. (located at ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...