Questions & Answers for: base flashing

Ad

...base shows "Uniden" which also keeps on flashing every 2 seconds. None of the buttons work. Tried putting in battery in the base compartment, but the same result. If I keep the handphone in base ...

Ad

Question about CLX485 Cordless Phone

1 Answer

...power. 4.charge light on main base should be flashing. 5.while the light is flashing press & hold the hash # button on the additional hand set only until it says registration complete & its all

Ad

Question about CLX485 Cordless Phone

2 Answers

...flashing stops, re-register the handsets to the base. Re-Register a Handset to the Base 1. Remove Handset Battery. 2. Reconnect battery while holding down "*" and "#" key. 3. Then press the right ...

Question about 27958GE1 Cordless Phone

1 Answer

...and no working hello there i think this is because you need to register the second handset with the base here are the instructions REGISTRATION Registration links the base to a cordless handset. Once ...

My handset displays "New Voice Mail" and the base displays 00. Handset displays "New Voice Mail" and the VMWI flashes continuously and the Base shows 00 and says "You have no messages". How do I ...

...The flash shoe was broken. Other than that the flash works fine. This part is just the plastic base that attaches to the flash holder on the camera. Please help me!! yes it can replace the ...

Question about Gigaset 8825 Cordless Phone

1 Answer

...flashing base at us and doesn't work. we've tried to register it to the base according to instructions.. it flashes registering but then stops and doesn't register.. it keeps flashing base. what is ...

Question about Speedlite Di622 TTL Flash for Canon

1 Answer

i have a Di622 Nissin Flash, the base is broken. I have a Di622 Nissin Flash, the base is broken. The part that slides into the hot-shoe. Would like a quote on the fix. i have a Di622 Nissin Flash, ...

Question about Speedlite Di622 TTL Flash for Canon

1 Answer

flashing stops, re-register the handsets to the base.Re-Register a Handset to the Base 1. Remove Handset Battery. 2. Reconnect battery while holding down "*" and "#" key. 3. Then press the right upper

...base for about 10 seconds (until the IN USE light starts to flash), then release the /HANDSET LOCATOR button. Immediately press /HANDSET LOCATOR while the IN USE light is still flashing. (The light ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Lands Phones Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...