...box is positioned. http://img106.imageshack.us/img106/5011/dsc02651hj9.jpg And here is how it is set up, I have a 3 port Audio/Video switch to which the cable from the computer is connected to. The ...
Question about D52WLCD 52" Rear Projection HDTV-Ready Television
...box audio output jacks. I also connected the TV audio out jacks to the input lines of a portable stereo system, and there was no sound either. It appears that the out jacks just do not work, or there ...
Question about B27A11Z 27" TV
...box set your VCR and TV to Channel 3 or 4 (depending on your area) If you are just using the VCR and an antenna set your TV to channel 3 or (depending on your area). That should do it for coaxial ...
...audio" buttons the screen box says "bypass" and i cannot get it to change to 3-d, pro logic, movie, or anything. just bypass. the sounds works perfect on regular tv, cds, game ps2, but not on dvds. ...
Question about ZHD-311 300W Complete Home Theater Sound System, Progressive Scan System
...box or sat, the audio would come from the cable/sat receiver by standard RCA, Optical, or Digital Coaxial, whichever your AV receiver will support. Hope this helps. If you need further help, post a ...
Question about Analog to Digital Audio Converter
...scan for channels as part of the setup. The other method is by using the audio/video component inputs to the TV and the set would then select AUX 1 or 2 etc to get the box input, and tune via the
Question about XBV441
...are connecting a cable box or satellite tv box to this television instead of connecting the audio composite cables between it and the tv, connec them between it and the stereo surround sound
box etc hooked up can cause this---check the audio mode on the TV first to make sure SAP is not selected. If not, check the box providing the signal to the set, it also has SAP. If you cannot find the
Question about R56W36 56" Rear Projection Television
...or a sync problem----using the video inputs bypasses the tuner and front end of the set's signal circuits---consider using a box with audio and video outs to a rear input and bypass the
Usually answered in minutes!