Questions & Answers for: cable wire

Ad

Question about Unshielded Twisted-Pair Patch Cable with Molded Boots (UTP) Cat. 5E - 1.5 ft., Yellow (325165)

1 Answer

...- 2 runs in each room - 1 for data, 1 for voice. How do I wire the phone ports as phone cable has less wires? Thanks Wire your phone box using your Cat5 cable, use 4 wires instead of 8 wires of

Ad

Question about Unshielded Twisted-Pair Patch Cable with Molded Boots (UTP) Cat. 5E - 1.5 ft., Yellow (325165)

1 Answer

wired computer cable. Absence of Step 2.2 Connect instructs location of wired computer cable included with the router. I don't seem to have this, just a blue ethernet cable. Where can I get the wired ...

Ad

Question about MFC-5460CN All-In-One InkJet Printer

1 Answer

wire of the phone cable to the copper outter most wire of the coaxial cable and tape it so that there isnt any of the outer most wire showing 6 connect the white wire to the center wire of the coaxial

wire cable, let the wires be red and black in the new cable, connect the red and the black cables of the new cable to the corresponding red and black wires of the old cable i.e. the new cable is to be

Question about (8) Cctv Dome Color Ccd Night Vision Vandal-proof Cams

1 Answer

...cable to wire your RCA camera, you will run the cable first, and then install a BNC (bayonet Neill-Concelman--named for the inventors) connector on each end of the cable. BNC connectors vary by ...

Question about (8) Cctv Dome Color Ccd Night Vision Vandal-proof Cams

1 Answer

...wire from cable A, and 1 black wire from cable B going to light. (C) Cable C: One cable goes to outdoor lights. Black wire going to outdoor lights connects to new on-off switch. So the outdoor light ...

Question about (88U33M) Ceiling

1 Answer

wire cable from the switch location to the fan/light box.At box #1 (a 2 gang box), you will run a power cable (marked cable #1) into it.  From there you run 2 sets of 3-wire cables (identified as

Question about Reference 420 On-and Over-Ear Headphones

2 Answers

...cable. 3.Peel the wire braiding away from the two colored wires attached to your headset and then twist the two wire braidings with your fingers to form a single length of wire. You have three wires: ...

Question about Reference 420 On-and Over-Ear Headphones

1 Answer

...wire cable to the dark common screw terminal. 2. Connect the red and black wires from the three-wire cable to the traveler screw terminals. 3. Join the white neutral wires together with a wire ...

...cable is cut, wire splice male aux cord My AI-NET cable is cut off with no connector at the end. How do I splice into the bare wire ends that make up the AI-NET cable and splice connect an AUX cable ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you a Computers & Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...