Questions & Answers for: cleaning head epson cx8400 printer

Ad

Question about CX8400 All-In-One InkJet Printer

2 Answers

Epson CX8400 I have a 8400 and when I try to print the black does not work. I have cleaned the heads and done nozzle checks and the black still does not print. But if I use scanner and copy I get ...

Ad

Question about CX8400 All-In-One InkJet Printer

1 Answer

home, it did the samething printing as if the ink was fading. Thank you have you tried to using the head cleaning? It will clean the nozzles inside your printer. you can check your manual how to do it

Ad

Question about CX8400 All-In-One InkJet Printer

1 Answer

...head cleaning passes to fix missing lines. Make sure the test pattern after cleaning has no gaps. Print the test page. If test page is bad and you have replaced all ink cartridges, then junk the ...

Question about CX8400 All-In-One InkJet Printer

1 Answer

...Epson CX8400 will not print black text? 1. Press Setup 2. Select Maintenance and press OK 3. Select Nozzle Check and press OK 4. Press Start 5. Check the nozzle check pattern that prints to see if ...

Question about Stylus CX6000 All-In-One InkJet Printer

1 Answer

Say ink is empty and they are 3/4 or better full of ink I have a cx8400 Stylus printer and it keeps telling me my color cartrige is empyt and they are not. Not at all Try head cleaning.

Question about CX8400 All-In-One InkJet Printer

1 Answer

...printing streaky, how do i fix this? Print head likely needs cleaning. Read your manual for instruction on how to do this. Typically accomplished from the maintenance tab in your printing

Question about CX8400 All-In-One InkJet Printer

1 Answer

...head. ?If the page does not print, the Epson Stylus CX8400 Series may have a problem. Check for additional solutions. If they don't work, contact Epson. general= ...

Question about CX8400 All-In-One InkJet Printer

1 Answer

...Head Cleaning and then print the nozzle check to check if all the colors are printed out, if after a few clean and the results are still the same, most probably your printer head is faulty. You will ...

Question about CX8400 All-In-One InkJet Printer

1 Answer

...Epson will tell you its a HEAD CLANING SOLUTION, but really all it is is distilled water, but you have to be carefull not to wet the electronics and you will need a large syringe to do the service, ...

head cleaning and my nozzle check still comes out skipping sections what is my next step i even adjusted print head and no good If it has been a while since you used the printer, the print head may be

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...