Questions & Answers for: create vlan

Ad

Question about Catalyst 4006 Chassis ( 4006)

1 Answer

...vlan How can i create HSRP ??????? You can only create HSRP within the same domain or per vlan .For instance for vlan 20 the config will be as follows: Primary side interface vlan 20 ip address ...

Ad

Question about 4500 24-Port Ethernet Switch

3 Answers

create the vlan interfaces. for example: Vlan 1 Int Vlan 1 ip address 192.168.1.1 255.255.255.0 Vlan 2 Int Vlan 2 ip address 192.168.2.1 255.255.255.0 This would create bosth vlans and vlan interfaces

Ad

Question about 1711 Security Access Router (CISCO1711-VPN/K9)

1 Answer

create the actual vlan interface by typing int vlan x and pressing enter, and then configure this like a normal interface with an ip address, etc (don't forget to no shut the interface!). You can then

Question about 1711 Security Access Router (CISCO1711-VPN/K9)

1 Answer

...to each vlan are block and can't access each pc's create a vlan and add a port into that vlan and connect a pc into that vlan do the same for all 3 pcs making sure that the same vlan id is never ...

Question about Enet Routing Switch 3510-24T Incl Na Power Cord Rohs (AL1001E08E5) Transceiver

1 Answer

create vlan in nortol 3510 L3 switch How do i create vlan in nortol switch model no 3510 You would need to trunk the VLANS to the router and create sub interfaces and then, create access lists applied

Question about Aironet 1242ag 802.11a/b/g Wireless Access Point

1 Answer

...wireless AP create a new vlan (eg vlan 10) then ensure that the ethernet port is the same bridge group number as the new vlan (bridge-group 10) do the same for the wireless port then shut down vlan ...

...create vlan's at hp 1800g24 switch... How to create vlan's at hp 1800g24 switch You will have to log into the switch, select VLAN and create a VLAN. ...

Question about 4500 24-Port Ethernet Switch

0 Answer

I have 3com 4500 switch , I have created 4 vlans , Vlan 1, Vlan2, Vlan 3, Vlan4 Vlan3 range should be from 10.88.120.0 to 10.88.120.127 subnet : 255.255.255.128 I created Vlan3 Interface as ...

...create a VLAN trunk port between the NetGear and the Cisco device but I believe the Cisco RV042 does not support trunking. If it does the trunk would be configured to carry all of the VLANs to the ...

...VLAN, create one service port for each Huawei xDSL port, and then add the created two service ports to the established standard VLAN. NOTE: The service ports can be added to the standard VLAN only ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you a Computers & Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...