Questions & Answers for: Viper door alarm

Ad

Question about 5701 VIPER 5701 2-WAY ALARM w/REMOTE START

1 Answer

...the GEM module. If it is a negative trigger solder in a 3amp diode with stripe towards the door then solder the door trigger from the alarm to the door side of the diode. Repeat for all door

Ad

Question about 5701 VIPER 5701 2-WAY ALARM w/REMOTE START

2 Answers

...alarm. 1. Put the key in the ignition and turn it to the "on" position. 2. Flip the toggle or hold the push button for at least 5 seconds. 3. The LED. light will stay solid on. 4. Turn the ignition ...

Ad

Question about 5901 Security Remote Start System

1 Answer

alarm and sets it off. This usually happens after 30 minutes. they should take the alarms door trigger and actually go to the cars door latch wires. The colors are: gray/black - driver door tan/white

Question about 5501 LC3 SST LCD 2 Way Car Remote Starter System

1 Answer

...alarm thinks the door is open even if the doors are closed. you can fix that by having a tech hook up the door triggers to the door latch wires and not the domelight itself...or you can program the ...

Question about 5002 2 Way Car Alarm with Keyless Entry System

1 Answer

...door lock wires for the Viper alarm are green (-)lock and blue (-) unlock. The Viper system only provides a negative lock/unlock pulse for the door locks. So, if you are working on a vehicle that has ...

Question about 5701 VIPER 5701 2-WAY ALARM w/REMOTE START

1 Answer

Kinldy help me with this. please. as soon as possible. No this alarm does not do that. You can set it up for passive arming where 60 seconds after the last door is closed the alarm will turn itself on

Question about Remote Start System

4 Answers

door lcks Does the remote diarm the alarm? Do you hear the " chirp chirp" when you press the unlock button on the remote? If not, then the remote is defective or needs to be reprogrammed to the alarm.

...and, the alarm does not trigger then, you have the wrong door trigger wire connected. If you were to list the year, make and model of the vehicle I could direct you to the proper wire and

Question about 5701 VIPER 5701 2-WAY ALARM w/REMOTE START

1 Answer

...alarm dosent read the door being open, if the alarm dosent read that the door is open you should be grounding out the door trigger (green wire in most alarms) and repeat steps to deactivate the ...

Question about 5701 VIPER 5701 2-WAY ALARM w/REMOTE START

1 Answer

alarm hasn't read the door open if it beeps press lock on the remote and it should beep again and its will be set. (if the alarm dosent beep you have to put the door trigger wire (green) to ground and

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Viper Vehicle Part and Accessory Experts

oneStan
oneStan

Level 3 Expert

434 Answers

garyg7133

Level 1 Expert

30 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Viper Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...