Questions & Answers for: Dodge Dakota drive shaft

Ad

Question about 1997 Dakota

1 Answer

drive shaft ? I need to replace the front drive shaft and am not sure how to do so? Mark the drive shaft postion to the transfer case and front axle. Remove the bolts/straps from the transfer case and

Ad

Question about 2000 Dakota Quad Cab

1 Answer

...drive shaft of my 2000 Dodge Dakota (quad cab) 4x4 V8 5.9? I took the 4 bolts off, but everything remains solid. The front half looks like it should slide out, so do I need to pop the cross & ...

Ad

Question about 1997 Dakota

1 Answer

i am trying to change the hangar bearing on a 97 dodge dakota Hangar Bearing? Those are used on conveyors and Screw Shafts Do you mean The Drive shaft Bearing?

...drive shaft to get new one on im trying to change the hangar bearing on a 1997 dodge dakota needs to go to a shop with a press, it is pressed on...new one will need to be pressed on. some units you ...

...drive shaft on a long box 1988 dodge dakota pick up. email me at extremeflyplanes@yahoo.com thank you, Scott. You've got to release the rear end driveshaft universal. Pull the rear shaft from the ...

...drive line removed and am installing new shaft. Dimensions on shaft CV jount are the same, length, diameter, etc. Suspect linkage has been removed and reinstalled improperly as the slide adjustment ...

Question about 1994 Dakota Club Cab

2 Answers

Hi,

...drive shaft fit a 4 wheel drive truck? I have an extended cab 4x4 and long bed and I think a 2wd drive long bed standard cab might work because of the length of the ex-cab and the transfer case. ...

...joints but mechanic says it could be part of transmission that hooks to drive shaft? what is that part called and where can I find it? thanks its called an output tail shaft most traany shops or ...

Question about 1995 Dakota

1 Answer

...and note the clock position of the final position of the drive shaft to make the wheel turn 2 complete revolutions. 3.50 rear end = 3 full turns of the drive shaft plus a half turn (6

...drive shaft? Has a double shaft with a bearing in the middle. Bearing has a square frame around it.Has 3 u-joints on the drive shaft. The shaft is removed in one piece. You first locate the two bolts ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2001 Dodge Dakota
2001 Dodge Dakota

995 Questions

1998 Dodge Dakota
1998 Dodge Dakota

851 Questions

1997 Dodge Dakota
1997 Dodge Dakota

695 Questions

1995 Dodge Dakota
1995 Dodge Dakota

711 Questions

1992 Dodge Dakota
1992 Dodge Dakota

605 Questions

Manuals & User Guides

Loading...