Questions & Answers for: GMC Jimmy drive shaft

Ad

Question about 1997 Jimmy

1 Answer

...DRIVE SHAFT TO THE FRONT IS IN THE WAY OF THE NEUTRAL SWITCH. I NEED TO KNOW HOW TO REMOVE THE DRIVE SHAFT. you do not need to remove it all the way disconnect it from the front diff and let it hang ...

Ad

...under there,one on the right side c.v.shaft,one on the left side c.v.shaft,and one on the front drive shaft.How do I determine if one of them is bad? Thanks, Dell Propeller shaft universal joint

Ad

...drive shaft replaced, said splines were worn THIS COULD BE YOUR UNIVERSAL JOINTS - GRAB THE FRONT DRIVE SHAFT WITH YOUR HAND ON EITHER SIDE AND TWIST BACK AND FORTH - IF THERE IS PLAY REPLACE THE U ...

...drive shaft too if it is a 4WD), then worry about having the drive shaft(s) checked/trued/balanced. Drive shafts are balanced at the factory with welded-on weights which sometimes (rarely) fall

...drive shaft splines ( drive shaft jumping ) You watch the parts moving and the joints or the cable that shifts the ront axel in and out not moving all the way it uses a vacume motor under the battery ...

Question about 1991 S-15 Jimmy

1 Answer

...drive shaft is torn on my 2003 GMC Jimmy 4WD. Do I need to replace the entire drive shaft? as I'm having trouble finding just the boot. yes the boot only is about 4 euros trade price ,but as to ...

Question about 2001 Jimmy

1 Answer

...drive shaft and take to a specialty shop that does drive shaft work,balancing etc Next choice is to take down the street to a local garage and have them replace joints, assuming they won't use a ...

...driving, Sounds like a wheel bearing or a bad CV shaft or u joint in the front end drive shafts, if it is 4 wheel drive. it also could be a break pad rubbing cause the caliper is stuck pressed

...drive shaft 1996 jimmy after removing the rear hold downs for u joint shaft will not slide forward Hi Todd, I'm glad to help! Todd sometimes when a drive shaft has been on a vehicle for a long period ...

drive shaft turn freely when the transfer case is in 2 high on a 2000 GMC Jimmy with auto 4 wheel drive? Or do the clutches in the transfer case keep constant tension on the front output shaft even in

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,327 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,100 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,105 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,080 Questions

2001 GMC Jimmy
2001 GMC Jimmy

819 Questions

Manuals & User Guides

Loading...