Questions & Answers for: duet bearing

Ad

Question about Duet GHW9150P Front Load Washer

1 Answer

...duet washer main bearing is broken--is it worth fixing or should I just replace the washer? i do hope that you have been using he detergent if not it will take the bearing out, if you have then the ...

Ad

Question about Duet GHW9150P Front Load Washer

1 Answer

Duet and it makes a loud howling sound when it is on the spin cycle. It did not make this sound when new. It is 15 months old. spin bearing going bad. u have to replace rear outer tub. spin bearing is

Ad

Question about Duet GHW9150P Front Load Washer

2 Answers

bearing is shot on the Whirlpool Duet Washer and it is not worth repairing, the machine is only 6 year old, any advice? a 6 year old washer should not be scrapped unless it is made in china, replacing

Question about Duet GHW9150P Front Load Washer

1 Answer

...duet washer size is 3.7 Cu Ft. Bearing last long or short depend on how ofter you use and how much clothes and whether you use heavy or light cycle. Normal use will last sometime 8 or 10 years. Heavy ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...duet washer, front loader, inner stainless drum rubs outer plastic drum? This sounds like a worn bearing housing or the bearing itself has packed up,either way you would have to strip and check these ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...duet ghw9100lw2. Machine is very loud on spin cycle... Makes a growling type noise and vibrates harshly. Took rear cover off and found slight leak and rust colored streaks and a mild leak from behind ...

Question about Duet GHW9150P Front Load Washer

2 Answers

Duet Sport Front-Loading Automatic Washer and it makes a pretty loud noise when in the spin cycle. The volume is directly proportional as to how fast the washer is spinning. It's a Model # WFW8300SW00

Question about Duet 3.8 cu. ft. Front Load Washer

1 Answer

...selling a bearing kit, just go to EBAY and do a serch for whirlpool duet bearing kit. they are not easy to replace but it can be done by a novice with a few tools and allot of pay chance......GOOD ...

duet makes a loud bearing type noise when the drum turns. I took off the back and turned the wheel attached to the belt by hand and it makes the noise. Is this a reasonable repair or am I shopping for

Question about Calypso GVW9959K Top Load Washer

1 Answer

...the job How to Replace Washing Machine Bearings Repair HE3 Washing Machine Bearing Noise ApplianceRepairVBlog 2 Replacing the rear bearing on Whirlpool Duet... Duet Whirlpool Sport Changing ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...