Questions & Answers for: ge wsxh208

Ad

GE Model WSXH208-How do you know if PUMP motor is not working? Washier Machine -- water does not drain...undo the pump that attached to the motor pump and moved stuff inside...put it all ...

Ad

Question about Electric WSXH208H Front Load Washer

1 Answer

...GE front loading WSXH208: The washer does not advance from wash to rinse to spin. With the initial setting the washer will apparently complete the wash cycle, but then stalls indefinitely. Manually ...

Ad

Question about WSXH208A Front Load Washer

2 Answers

...wsxh208 washer that pounds awfully when in spin mode washer is level????? check the shocks to see if broken.Is this item new?did you remove shipping restraints?Also check the top springs to see if ...

Question about WSXH208A Front Load Washer

1 Answer

The rubber seal has come away from the inner seal drum after one of the shocks broke. I have replaced the shocks but the seal is off. How do I reattach the seal to the drum? model#WSXH208 You would ...

Question about WSXH208A Front Load Washer

1 Answer

...WSXH208 front loading washer is not spinning enough water out of her clothes. Any ideas?? Pump clogged. There should be a clean out on the bottom front of the washer...good

Question about WSXH208A Front Load Washer

1 Answer

GE WSXH208 Washer - Filter is CLEAN - Could it be the Control Circuit Board? Live in a condo where many residents have this washer and experienced the same problem. Final spin never kicks in fully and

...WSXH208 ge front loader It started to fill was and then in the middle the water pumped out but did not finish and clothes were sopping wet, Drum stopped spinning. what could be wrong after half the ...

...of GE wsxh208 washer I heard a click when shorting out the wires. Seems to have come from the left side of the unit. their is a circuit breaker or a cut off just find the service manual and locate ...

GE washer WSXH208 I shorted out he 2 wires (blue and white) on the bottom of the door latch assembly thinking I could hot wire it to run while the part came in and heard a click in the left side of ...

Question about WSXH208A Front Load Washer

1 Answer

ge washer WSXH208 drum wont turn the drum doesn't turn during wash or spin cycles Take back panel off and see if the belt broke or possibly came off the pulleys. Should go from motor pulley up and ...

Not finding what you are looking for?

Brands:

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85219 Answers

Brad Brown

Level 3 Expert

18136 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...