Questions & Answers for: Chevrolet S 10 ground strap

Ad

Question about 1992 S-10

1 Answer

...i can put the battery in my 81 ford , and it fires up, it has me puzzled i went and added different ground straps, and anopther positive cable, i am very puzzled, looks like i have all my connections ...

Ad

Question about 1998 S-10 Pickup

1 Answer

...ground strap is reinstalled, and this is No good! Also both terminal ends of these ground straps are a good source for corrosion to develop. Corrosion makes a bad contact. I myself would take the ...

Ad

Question about 1994 S-10

2 Answers

...ground strap is connected from the chassis to the engine if you cant find it make one get a good ground on the firewall some where and put the other end on a bolt somewhere on the engine ... just one ...

Replaced fuel pump on 2003 s-10, now fuel pump won't kick on. Already checked the relay and fuses. Need to know where to look next. check ground strap by fuel tank

After you get the straps loose, and the fuel lines and harness disconnected, lower the tank to the ground, and the fuel pump/ sending unit assembly is removed from the top side of the tank

Question about 1996 S-10 Pickup

1 Answer

...ground strap. They are usually a flat braided un-coated cable at the back of the motor. When me and my brother changed out a ranger transmission we spent 2 days and $400 on new electronics. When we ...

Question about 1996 S-10 Pickup

2 Answers

...ground strap. Since you had the top off the engine, this is the most likely problem, depending on where you ground attaches to the engine. As for the fuel pump, this could also be a ground issue or a ...

Question about 1996 S-10 Pickup

1 Answer

...going out. Relay is also brand new. make sure that your ground wires are not rusted off between your  radiator support and your fender also the ground strap between your fender and the ...

...to from the battery. Take the negative jumper cable and hook it to a good steel, iron, or aluminum ground connection right by the starter, on the motor. Now try the key to start it. If it still says ...

...have checked all wire harness..changed all sensers..changed pump changed key igniton..clead all grounds and replalced some ground straps..can get coils too fire out truck..check enginr light ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...