Questions & Answers for: hot melt glue gun

Ad

Question about Polygun AE II Hot Melt Glue Gun

3 Answers

...Hot Melt 3764 is the correct adhesive for PVC. They sell PVC cement at home depot, does it need to be hot glue? That product is very expensive, I would try Power Adhesives 246. It is a high ...

Ad

Question about Polygun AE II Hot Melt Glue Gun

1 Answer

...glue stick into the back of the gun. After doing this plug in the gun and allow it to heat up. When the gun reaches the correct heat level you will be able to pull the trigger of the gun which will ...

Ad

Question about Polygun AE II Hot Melt Glue Gun

1 Answer

...hot (without plugin any glue into ) about an hour.. When it gets hotter the molded glue in the back channel/barrel of the gun will be melted and back side will be freed to accept a new glue stick. My ...

Question about Polygun AE II Hot Melt Glue Gun

1 Answer

what is wood glue sticks Wood glue sticks are hot glue sticks which are specifically designed for use with wood (such as for glueing together a birdhouse).

Question about Polygun AE II Hot Melt Glue Gun

1 Answer

...hot melt glue gun purchased 10 nyears ago and now cannot find a supplier for the refills.The glue stick are tubby,approx, 2 inches long, can you help please. Many Thanks IUrene Bell Check with ...

Question about Bostik Hot Melt Glue Guns Adhesives

1 Answer

TEC 810-12 hot melt glue gun trigger is not working, the trigger button spring must have came off, how can i put the spring back on it is very complicated, is the gun still on a warranty?

Question about Bostich Heavy Duty Dual Melt Glue Gun GR25

1 Answer

...hot glue gun Wires to inside of gr70 hot glue gun came off. can't find right attach point to heat it up again, inside the gun. Not sure about the wires, but you can contact Stanley customer ...

Question about Bostich Heavy Duty Dual Melt Glue Gun GR25

1 Answer

...hot enough to melt the glue stick you have put inside through the hole (that is glue stick sized and on your end) then the trigger will push the glue stcik into the hot metal melting and coming out ...

Question about Gr100 Glue-pro Dualmelt Glue Gun

1 Answer

...melt the glue. It is pretty straight forward. As the glue stick is consumed you stick in another glue stick. I suggest testing on something before using on your project. Do be careful of the hot end. ...

down and left it that way for a LONG time, and the melted glue backed up inside the heating element. A glue gun should never be laid on its side while hot but idle, especially for long periods of time

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Crafts & Hobbies Experts

R.A. Ellis
R.A. Ellis

Level 3 Expert

12731 Answers

thinksewfast

Level 2 Expert

89 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

29709 Answers

Are you a Crafts & Hobbies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...