Questions & Answers for: Ford hot melt glue gun

Ad

Question about 2003 E250

1 Answer

...know an inexpensive source for one of those? Thanks Try a hair dryer or a heat gun. Works really well. The glue that is left behind after the decals are removed can be removed with mineral

Ad

Question about 1983 Fairmont

1 Answer

...name a model Take the bumper off and use a fibre glass repair kit to repair it. Or a hot glue gun and some strips of metal will do the trick Then buy a color match polish and give it some elbow ...

Ad

...hot glue gun or very hot candle wax. Any ideas and should I worry? (Did replace battery recently w/new one). Problem occurs when I'm driving and getting the heat going. Smell comes and goes. When I ...

Question about 2003 Focus

1 Answer

...glue say no. He's just learning to drive and maintain his own vehicle and is quite upset at his mistake. Any suggestions? My experience with that would be to use a hot air gun or a hair dryer (would ...

Question about 2003 Focus

2 Answers

...melt when the power being forced through them is more than the wire can handle. The excessive power draw is caused by a short or a bad motor with improper fuse protection. The computer wouldn't cause ...

Question about 2001 Taurus

1 Answer

catalytic converters get red hot change cataiytic converter front and rear and still get red hot have a skip If you have a skip,,then thats what killing the cats..If the new one turn red on ya,,you ...

...or glass shops don't re attach terminals on glass, frustrated. If you use cyanoacrylate, (super glue paste) that will hold it. Make sure the foil is also stuck or it will burn out from a hot

melt the foam), or use special products to dissolve the glue, cause if you don't do that usually the foam will just rip appart and you'll be left with a scrapped seat... The best is to either bring it

...of smell coming from the engine. But as soon as I turn it off the smell goes away. Any ideas? Sometimes people will run over a plastic bag and it will melt on the hot exhaust pipe and cause to

...intake. 1000 miles later the intake is melted again. replace the faulty EGR system it is letting hot exhaust gases into the inlet system on an uncontrolled ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,703 Questions

1998 Ford Explorer
1998 Ford Explorer

2,937 Questions

2001 Ford Focus
2001 Ford Focus

2,580 Questions

1999 Ford Taurus
1999 Ford Taurus

2,314 Questions

2004 Ford F150
2004 Ford F150

2,587 Questions

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...