glue gun to hold the cable in place inside the electronics unit. My plan B if the soldering was not possible was to take a jack plug and lead from an unused set of earpieces and use that lead in place
e604 how do i get inside to check the wires I have the same problem. I have had a go at getting inside but it definately looks completely sealed. I know it is still under warranty but I recon it is ...
Question about CX 300 Consumer Headphones
Sennheisser cx300 ear buds ..one channel has lost volume. Suspect it needs cleaning What is the best way to clean the ear bud surface? Thanks Bill I have been having the same problem for the past week
Question about Evolution G2 100 Series UHF Handheld Microphone System (B) EW165G2B Microphone
...to use as spacers and placed them evenly around the coil. I used a hot melt glue gun and placed 3 small drops around the edge of the coil. Remove the spacers and the coil should be secure. Joey ...
headband has broken on the 465 headphones. Is there an easy way to repair this\/ If it is plastic the only way I have found that will hold it together is to melt them together with a soldering Iron. I
Question about PXC 250 Consumer Headphones
Hi, could you please provides a circuitry diagram for PXC250.My headPhone was broken, i'm gonna to fix it.cheers! Looking at them from the picture provided by FixYa, I rather think there's no ...
my plug at the end of my headpone broke so i tried to fix it but is has three wires i don't get it?? One is for left, one for right, and one for ground...the usual color code is right=red, left=white,
The Left speaker has stopped working and moving around the cable does not fix it, what can I do? HELLO I ALSO HAVE HD238 AND I FIGURED WHY THE ONE SPEAKER PLAYS THATS BECAUSE THE COMPANY WANTS TO MAKE
Question about MM 450 Wireless Bluetooth Stereo Headset
My sennheiser mm450 becomes hot When it use battery It takes half on hour that battery is empty and the headset is hot Almost definitely bad battery.
Batteries Hot Batteries get hot during operation and drain fast. suspect a short but there is no short in the battery terminals. This sound to me that an electrolytic capacitor has given up and went ...
Usually answered in minutes!
Step 2: Please assign your manual to a product: