Questions & Answers for: hot melt glue gun Vacuums

Ad

Question about Floormate H3000 Upright Wet/Dry Vacuum

15 Answers

...hot glue on the tip of this plastic "plunger" piece and let it harden. Replace the liquid dispenser tank and try the machine again. My machine dispensed liquid properly after this fix-it. I really ...

Ad

Question about Floormate H3000 Upright Wet/Dry Vacuum

14 Answers

...hot glue gun to glue it to the plastic piece on the base that pushes in on the plunger on the water container. It fit perfectly on the round plastic piece. Works great now! Thanks for all the ...

Ad

Question about F6212-900 / F6215-900 SteamVac Agility Upright Vacuum

8 Answers

...hot glue gun, a little at a time - didn't melt the hose plastic - and made sure to cool the hot glue with the "no heat" setting on the dryer before moving onto the next 1/2" section. Reinstalled the ...

Question about F6212-900 / F6215-900 SteamVac Agility Upright Vacuum

1 Answer

...hot enough to melt it's own parts, i think you have a problem. exesive heat could indicate a serious problem and might also cause a fire. try having it checked by a repair shop because replacing the ...

Question about Floormate H3000 Upright Wet/Dry Vacuum

2 Answers

hot glue on the tip of the blue/greyish "plunger" piece that is located in the middle of the black rubber circle. Let the hot glue dry (this forms an extension to the plunger piece...) and replace the

Question about 5893AVZ Bagless Upright Cyclonic Vacuum

2 Answers

The handle for my Eureka 5993 AVZ was getting very hot when used. Finally, the wires around the switch melted and now the vacuum will not work. What is wrong? Is the switch bad? The wires only melted ...

Question about 5893AVZ Bagless Upright Cyclonic Vacuum

2 Answers

The handle for my Eureka 5893 AVZ was getting very hot. Finally, the wires around the switch melted and the vacuum will not work. What is wrong? Is the switch bad? Nothing else appears to be wrong. ...

Question about 5893AVZ Bagless Upright Cyclonic Vacuum

1 Answer

Vacuum was running unusually hot recently and then Fein vacuum turbo II Vacuum was running unusually hot recently and then when I turned it off it wouldn't come back on if it was running hot ...

Question about M084600 Dynamite Bagless Upright Vacuum

1 Answer

...hot and melt the belt i think your talking about the motor spindel,,(the little metal bit?) if the motor is that hot its going to burn out soon, check that the brush is free to turn if its tight free ...

Question about M084600 Dynamite Bagless Upright Vacuum

1 Answer

...glue can melt and since it is close to your vacuum motor that creates heat causing it to melt so I personally would just go buy a new one they are like 20$ but if you want to keep on trying glue I ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...