Questions & Answers for: idl 60

Ad

Question about Office Equipment & Supplies

1 Answer

...SAVIN 3350DNP has a SC05-60 code what should I do to fix this problem. Thank you. SC05-60 is... Idling HP sensor remains on. The sensor does not de-activate after the idling roller motor on

Ad

Homelite ut 10550 engine runs at 60 to 100% of full speed will not idle at less than 60% approx. Adjusting idle screw 'T'has no effect, cleaned filter no change. Saw has only run for about 5 litres of

Ad

Car is shaking at idle and then 60 mph It is shaking when it is idle in drive and then it goes through gears smoothly and will start shaking when you accelerate when you're going around 50-60 BAD ...

...about 30-60 mins. and turn the engine off, then i try to turn on the engine again, it doesnt stay idle and it turns off. this only happens when im driving in very hot weather (phoenix,az). Idle air ...

engine stalls at idle at 35 mph at 60 mph speeds I think you mean the engine stalls or cuts out at Idle/30/60 mph. More info wanted,as first is it a Man/or Auto ,what engine have you got 6 or v8??? ...

Question about 1997 Grand Cherokee

1 Answer

1984 Kawasaki KX 60 will not idle 1984 kx 60 new piston/rings new coil bike was running fine then lost band now it will idle fine but won't go hard if I kick it will start and idle fine drop the ...

91 buick lesabre has high idle. Ive replaced the tps and that made the trans not want to shift into O/D I put the old one back on and now its idleing way to high and wont idle down no matter what I do

I have a 1999 nissan frontier with a 3.3 automatic 4x4. At idle the rpms are at about 1200 to 1400. At 60 mph the rpms are at 3200. Is this normal or is there something i can do to fix this? There is ...

Question about 2005 Boulevard C90

1 Answer

setting idle want to idle it slower If you have carbs: http://www.bikebandit.com/2005-suzuki-boulevard-c90-vl1500-carburetor/o/m147639sch503698 Part #60 adjusts both carbs' idle speed evenly. If you ...

Question about 2005 Boulevard C90

1 Answer

fast idle when starting cold engine Should idle fast when cold for around 60 seconds. Does it stay idling high ?

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...