Questions & Answers for: ih code

Ad

Question about DPSB613EDWW Electric Dryer

1 Answer

...IH alternate flashing with the time remaining based on the sensor system estimate of drying time. Can't find the error code (or information code) IH anywhere in the manual. Can you help? 1H = 1 ...

Ad

Question about DPSB613EDWW Electric Dryer

3 Answers

...code not cleat 08-400 then check these all thengs.. 1.Check the thermistors (1) Check if the connectors are disconnected. (2) Check if the main and edge thermistors are in contact with the surface of ...

Ad

Question about Estudio 200L Copier

2 Answers

...code not cleat 08-400 then check these all thengs..1.Check the thermistors (1) Check if the connectors are disconnected.(2) Check if the main and edge thermistors are in contact with the surface ...

...code not cleat 08-400 then check these all thengs..1.Check the thermistors (1) Check if the connectors are disconnected.(2) Check if the main and edge thermistors are in contact with the surface of ...

Question about Estudio 200L Copier

2 Answers

...code not cleat 08-400 then check these all thengs..1.Check the thermistors (1) Check if the connectors are disconnected.(2) Check if the main and edge thermistors are in contact with the surface ...

Question about Estudio 200L Copier

2 Answers

...code not cleat 08-400 then check these all thengs..1.Check the thermistors (1) Check if the connectors are disconnected.(2) Check if the main and edge thermistors are in contact with the surface ...

Question about e-Studio 205 Copier

1 Answer

...code not cleat 08-400 then check these all thengs..1.Check the thermistors (1) Check if the connectors are disconnected.(2) Check if the main and edge thermistors are in contact with the surface ...

...code not cleat 08-400 then check these all thengs..1.Check the thermistors (1) Check if the connectors are disconnected.(2) Check if the main and edge thermistors are in contact with the surface ...

Question about COPIERS E-STUDIO 520 Copier

2 Answers

code c447 Fuser error...Clear the message... 08-400 "0"If occur again, u need to check the fuser probable, such as themistor, IH board, connectors and etc... If 1st time occur, u can just go to 08-400

Question about e-Studio 202L Copier

1 Answer

...code not cleat 08-400 then check these all thengs.. 1.Check the thermistors (1) Check if the connectors are disconnected. (2) Check if the main and edge thermistors are in contact with the surface of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

jimorris77

Level 3 Expert

411 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you a Dryers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...