Questions & Answers for: install hacksaw blade

Ad

Question about 1990 GSX-R 750 L

1 Answer

...glide on only when filter bottoms out gets tight. take the old filter an check threads match the new filter if are the same? take old filter with an old hacksaw blade cut the threads in a slight ...

Ad

install an undermount sligranit sink (counter is granite with 5/8 ply sub deck), so that in the event it needs to be replaced, it can easily be removed? Thanks! LA under mount sinks are 'glued' to the

Ad

...install new ignition switch in 1999 Roadstar Yamaha. How do you remove existing bolts as appear to be snap offs or something. 2 ways of doing this....(1) if you can access the bolt heads, with a ...

Question about 1990 GSX-R 750 L

1 Answer

...hacksaw to protect the vinyl. Put the saw blade between them and cut thru both sides of the U shaped latch. After cutting thru both sides of the U shaped lock the door will open. You can buy a new ...

...hacksaw to protect the vinyl. Put the saw blade between them and cut thru both sides of the U shaped latch. After cutting thru both sides of the U shaped lock the door will open. You can buy a ...

...install the replacement plug, you must adjust the spark gap of the plugs to the thickness of a hacksaw blade. 4.After installing the spark plugs, replace the ignition wires to it's proper places. ...

Question about Composite Hacksaw

1 Answer

...hacksaw 15-892 12" composite and I bought new blades to change them but I can't seem to figure out how to install new blades. I don't believe misplaced any parts as far as I can tell. Easy-open lever ...

Question about - Toilet - One-piece - Santa Rosa - K3323-52

2 Answers

...install the toilet, go buy the new bolts at the hardware store and by looking at the bolts and looking at a floor plate at the store -- this will give you a idea of what you are trying to remove.. ( ...

Question about - Toilet - One-piece - Santa Rosa - K3323-52

1 Answer

be installed "up side down" so be sure the hole is clear on both sides of the bar. If you have an old hacksaw blade try cleaning the groove in the bar. Most of the time this will eliminate the problem

Question about - Toilet - One-piece - Santa Rosa - K3323-52

1 Answer

...install, the original looks like it has some sort of fixing like a rivet securing it to the steering column, if i grind this off will the barrel come out and how will it effect the replacement barrel ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5968 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

richard libby

Level 2 Expert

209 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...