Questions & Answers for: jumper settings

Ad

Question about Computers & Internet

2 Answers

...JUMPER SETTINGS FOR MICRO STAR MS-6533E MOTHERBOARD. THANS FOR THE HELP! why are u trying to set the jumpers ? i should have thank u if u add some more details. all the jumpers onboard have their own ...

Ad

...jumper settings for maxtor n256 model 96147h6 i wish to run it as a slave pls help. thx For use as slave there is no jumper connected. (Master on/slave off0 The jumper settings are listed on the top ...

Ad

Question about Fireball Lct20 (QML20000LD-A) 20 GB Hard Drive

2 Answers

...jumper contactor, nevermind just use what ever conductor cable to roll between the two pin and make sure the pin is connected that all. YBC (/\) Hello! Here are your jumper settings: Hope this

Question about Fireball Lct20 (QML20000LD-A) 20 GB Hard Drive

3 Answers

...jumper settings for each kind of drive. Serial ATA drives don't need master/slave jumpers. You can choose "computer select". In fact, you should be a ble to run an ATA drive with no jumper. When you ...

...also, if one is set to single drive it will likely bypass the slave drive. Here is the link that will teach you on how set your jumper settings easily from IDE to SATA maxtor hard disk ...

jumper settings for slave drive model 33073u4 30 jumper settings for slave drive model 33073u4 30 gig hello go to this link.. it will illustrate jumper setting http://sysdoc.doors.ch/MAXTOR/diamondmax

Question about Hard Drive

1 Answer

...jumper settings are marked on the circuit board. MA = master SL = slave CS = cable select If this hard drive is the one installed on the Primary IDE controller the the jumper has to be set to Master. ...

...jumper settings for model 7245At maxtor hard drive jumper settings for model 52049h3 1. Jumper settings for model 7245At refer to LINK 2. jumper settings for model 52049h3 refer to LINK Hope it

Question about Hard Drive

2 Answers

...DS = Master SP = Spare (Slave) Jumper settings, If you use one id cable with tow devices at that time you should hard disk jumper master & second device slave mode of jumper. hard disk ...

Question about Pavilion m8417c PC Desktop

1 Answer

JUMPER SETTINGS Warning: Incorrect settings may produce undesirable results. Please research thoroughly before making any changes. You can set the jumper as follows: Clearing the BIOS settings CAUTION

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a Computers & Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...