Questions & Answers for: lamp shade repair

Ad

Question about 42V715 Rear Projection Television

2 Answers

lamp but wondering if this will really solve anything. Repair Kit for Hitachi convergence Chassis DP-14G KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors: http

Ad

Question about 42V715 Rear Projection Television

2 Answers

SHADE IN THE MIDDLE OF THE PICTURE WE ARE NOT SMOKERS. TRIED ADJUSTING COLORS.BUT NO CHANGE. REPLACED LAMP AND WAS TOLD IT MIGHT BE LITE ENGINE PROBLEM. JERRY SA TX Please take the tv to a repair shop

Ad

Question about KDSR50XBR1 50" Projection HDTV

1 Answer

...lamp 2 months ago. Stand-by green light flashes for a long time before the picture appears but with no audio. The entire picture is dark in shades of blue. I would suggest getting another optical ...

...lamp or inverter PWB. 3.Adjust the position of the contact glass (shading plate). If the problem still occurs, replace the scanner home position sensor. 4.Check the connection of connector YC7 on the ...

Question about GV42L 42 in. LCD Television

1 Answer

...lamp(s) in the backlight panel are starting to go. Usually an expensive repair. Get an estimate but may be better to use the repair money on a better brand set. Vizio's have a very high failure

Question about KM-1815 All-In-One Laser Printer

1 Answer

...board (KP-5063), and the continuity across the connector terminals. Repair or replace if necessary. These are direct from the Tech man. More than likely it is the Exposure Lamp. Hope this

Question about KM-1815 All-In-One Laser Printer

1 Answer

lamp shade has become stuck and I can not remove the existing lampshades. Also the light buld in one lamp does not work. Any suggestions on where I could take them to be repaired/get required parts. I

Question about KM-1815 All-In-One Laser Printer

1 Answer

Repair or replace if necessary. Defective exposure lamp or inverter PWB. Replace the exposure lamp or inverter PWB. Incorrect shading position. Adjust the position of the contact glass (shading plate)

...lamp made by Hampton Bay that is broken. Can you tell me what glue you recommend to repair it. I can send you pictures if necessary. Depending on where it's broken, epoxy glue might work. Some ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...