Questions & Answers for: Pontiac lock unlock

Ad

Question about 2006 G6

1 Answer

...lock and unlock to confirm the program mode. Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of approximately 15 seconds, the doors will lock and ...

Ad

...LOCK to UNLOCK operation within 3 seconds to inform the selected mode. ? In the confirmation mode, when the operation is performed twice, it directs that 2 types of recognition codes have been ...

Ad

Question about 1997 Trans Sport

1 Answer

will lock but not unlock power button will unlock but not lock IF POWER LOCKS DONT LOCK ITS YOUR DOOR LOCK RELAY BAD.IF YOUR POWER LOCKS DONT UNLOCK ITS A FAULTY UNLOCK RELAY.

Question about 2007 G5 Gt Coupe

2 Answers

...unlock and lock unlock and lock and unlock the speedometer goes to 0 and the transmission goes in 2 gear no mater how fast your going the mileage will --- --- and power steering will flash on the ...

...unlock or lock and has now repositioned the nuetral point at a different location on the locking rod, hence, sending false readings to the control unit to either unlock or lock, I would try this, ...

Question about 1999 Montana

1 Answer

...lock/unlock button there was no response. The passengers side would lock and then unlock rapidly when you pressed the lock/unlock button. So in order to see whether it was a wiring issue or simply a ...

Question about 2009 Solstice Convertible

4 Answers

lock/unlock signal circuit. Each door lock switch receives ground at G300 which is also the ground for the door lock and unlock relays located in the BCM. When a door lock switch is placed in the lock

Question about 2006 Grand Prix

1 Answer

...lock and unlock control circuits to actuate the locking or unlocking functions. When diagnosing door lock malfunctions, these circuits must not be confused with the other battery voltage and ground ...

...lock or unlock position the BCM will receive a voltage signal on either the door lock switch lock or unlock signal circuits. The BCM, upon receipt of a lock switch lock or unlock signal, will switch ...

lock/unlock switch to unlock,it may take a few tries but should unlock.DO NOT lock the door again until you have lubed the lock assembly and are happy with it's operation.If it's an electric lock fail

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...