Questions & Answers for: loose presser foot

Ad

...loose. Since the presser foot is spring loaded to the down position leave the presser foot raising lever in the down position. With your flat bladed screwdriver, gently push the metal keeper to it's ...

Ad

Question about 7462 Mechanical Sewing Machine

1 Answer

...loose Not sure what the problem is. There is a screw that holds the presser foot shank to the presser bar. When the presser foot shank is lowered, it snaps onto the presser foot. See page 26 of the ...

Ad

Question about 7462 Mechanical Sewing Machine

1 Answer

...presser foot bar.  If it is loose it could have slipped off the part that makes that happen.  Also the part on the presser foot bar can be broken but you won't be able to tell until you ...

...loose on presser foot and bobbin case won't stay in balance At first I thought I was setting the bobbin case in wrong but it won't stay properly in place and jiggles so machine catches and jams. The ...

Question about 3343 Mechanical Sewing Machine

1 Answer

...lifter Bernina 150 Quilter's Edition The presser foot lifter goes up and down but feels "loose" in the down position. Fabric doesn't feed when the presser foot is down. foot pressure needs ...

...Loose The presser foot feels loose when in the down position and the fabric doesn't feed. If I push down lightly on the foot the feed dogs engage and the fabric feeds. The presser foot isn't applying ...

Question about CS6000i Computerized Sewing Machine

1 Answer

presser foot bar has become loose within the lifting mechanism. You could save yourself some trouble by taking your machine to a sewing machine repair shop, but if you would rather avoid that expense,

Question about Quantum XL-6000 Computerized Sewing Machine

1 Answer

...loose. Your presser foot when raised should be 6.3 mm (5 dimes) above the needle plate. That's important to know, because if you're going to tighten the fastener, chances are the foot is no longer ...

...foot does not. Singer sewing macine. There may be a disconnection between the lever and the presser foot bar. Perhaps a screw has fallen out, broken, or is loose? May need to take it for

Question about Quantum XL-6000 Computerized Sewing Machine

1 Answer

...presser foot. Perhaps something has become loose, fallen off, or become damaged. Have you tried a different presser foot and, if so, does it work? If more than one presser foot will not attach, then ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6073 Answers

Chris Wetmore

Level 2 Expert

190 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...