Questions & Answers for: pixma replace glass

Ad

Question about PIXMA MP780 All-In-One InkJet Printer

2 Answers

...pixma mp780 - vertical line on printing i have recently been getting a vertical line from the 3ebk cartridge only & only on printing (not a glass cleaning issue on fax/scan/copy). i have run numerous ...

Ad

Question about PIXMA MP830 All-In-One InkJet Printer

1 Answer

...glass on the scanner unit they just replace the whole scanner assembly, the reason? there are a lot of plastic clips holding it together and springs and cables that are easily dislodged, often the ...

Ad

Question about PIXMA MP750 All-In-One InkJet Printer

1 Answer

vertical lines when using document feeder to scan when using the document feeder to scan to computer all scans a are showing blue vertical lines you may have dirty glass on scanner or the feeder ...

Question about PIXMA MP780 All-In-One InkJet Printer

1 Answer

...Pixma MP780 all in one printer, i get a red line down the scanned image? This is what the service manual says: (1) Clean the Document glass. (2) Check the connection between the contact sensor and ...

Question about PIXMA MP530 All-In-One InkJet Printer

1 Answer

...glass top. Check the paper path from top feeder. Sometimes is a transparent plastic film need to be replace cause a scratch and sometimes is dirt or other obstruction like dust or liquid paper still ...

Question about PIXMA MP950 All-In-One InkJet Printer

1 Answer

How to clean under side of glass on Canon mp950 The scanner is not made to be taken apart. Canon only replaces the entire scan assembly, so there is no cleaning. It should be new enough for a warranty

Question about PIXMA MP460 All-In-One InkJet Printer

1 Answer

...PIXMA MP460 - I want to have that replaced.. what would be cost The Canon scanners are only one piece, you can only replace the entire scanner as no separate parts are available. The last one I ...

Question about PIXMA MX860 OFFICE AIO-2.5IN LCD 19.4X17.1X8.9IN All-In-One InkJet Printer

3 Answers

...Pixma MX860 printers, on each of which an old printhead worked fine. I was tempted to return it - especially because the printhead as delivered was wet with ink and some other fluid, but found that a ...

Question about PIXMA MX310 All-In-One Printer

1 Answer

...glass unit. 3. Wait for the cartridge carriage unit to position itself in the middle. 4. Once ink cartridge carrier in the middle, lift up the carrier lock lever. 5. Remove the black or colored ...

how do I dismantle the Scanner Unit (the box with the platen glass on top)? Scans and printed copies in Standard (300 dpi) quality are blurred, particularly down the half of the scanned page that is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...