Questions & Answers for: power nozzle

Ad

Question about E series Canister Wet/Dry Vacuum

1 Answer

...power nozzle vacuumed with power nozzle one day working fine took attachment off to use crevice tool reattached power nozzle and no power whatsoever ...

Ad

Question about Dayton 3XY38 Nozzle, Turbo, #7.0

1 Answer

...Now release the power button on the printer. 3. Turn off the power button on the printer & then turn on. 4. Clean the nozzle & try printing. Hope it solves the problem as it did in my

Ad

Question about Dayton 3XY38 Nozzle, Turbo, #7.0

1 Answer

power nozzle works intermittently brand new vacuum. power nozzle works intermittently. when you push forward works, pull back power nozzle stops working. The pin connection from the lower handle tube ...

...power nozzle model N106m Is it possible to get a new electrolux power nozzle model N106m for my grey electrolux? If you're looking for a new head for your vacuum. Then you're going to have to replace ...

Question about SuperVac 6000 Central System Vacuum

1 Answer

...power nozzle overload switch on the top of the power nozzle that will shut down if anything is vacuumed up that causes stress on the belt. Try pushing this reset switch before opening up the power ...

Question about SuperVac 6000 Central System Vacuum

1 Answer

...power nozzle at your place. If their power nozzle works fine, then it's loose or worn wiring in your power nozzle or connection. Also, you can try your power nozzle at their place to double check. ...

Question about Majestic Canister Vacuum

1 Answer

Power nozzle has quit working Power nozzle of Majestic 360 was just working and has quit. Filters have been changed and canister emptied. Has there been a recall on these nozzles no one told me about?

...Power Nozzle to replace the belt? The Vacuum Model # is MC-V9635 The Power Nozzle Model # is C50XABF0R014. There is no obvious way to open the nozzle up. The top part of the nozzle pops off just put ...

Question about Majestic Canister Vacuum

2 Answers

...power nozzle for the original D4C was a model R-2800C. In 1990 Rexair came out with the model R-4375C power nozzle which included an electric hose. In 1994 a few more minor changes were made as well ...

...power nozzle from operating properly, the most likely is, since it's an Epic series, Is that the power nozzle elbow assembly needs replaced as the fine wires and top of the elbow tend to break/short ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...