Questions & Answers for: printer drums last

Ad

Question about HL-2040 Laser Printer

1 Answer

...last week yet the light will not go off. So this means that we can not print on our 3 month old HL 2040 laser printer Did you do the drum reset procedure when you replaced the drum? It was on the ...

Ad

Question about HL-2040 Laser Printer

1 Answer

...DRUMS. TYPE OF PRINTER HL-2040 Take the drum out and wrap it up to keep the light out of it. Check the contacts inside the printer and make sure there is nothing broken on them. If there is toner on ...

Ad

Question about LaserJet 2820 Printer

1 Answer

...last. when printing test page, noise was observed, sound coming front front left of printer (I walked around the printer and it was not difficult to notice where noise was coming from. inspected ...

drums but the printer still won't acknowledge them. 2: A printer that worked fine last week was just reinstalled onto a new computer and now only prints blank pages when jobs are sent to it. It is not

drums last a short time compared to a-Si drums. So there are small things you can do but if you can't change what you run you are about stuck with that drum life. Keep in mind that some sites may tout

Question about bizhub 200 All-In-One Printer

2 Answers

...printer documentation. You may be able to purchase a drum/toner kit. Drums last longer than Toner cartridges so you will replace the Toner cartridge more often than the Drum. That model uses a Drum ...

Question about MX-3501N All-In-One Printer

1 Answer

What does code: DK means?. How can I fix it? This code indicates that the Black Drum has reached 100k. It could also be the black developer and primary transfer belt are at 100k. DC = Drum Cyan DM = ...

Question about HL 1440 Laser Printer

1 Answer

printer? The toner drum/cartridge was dropped when last changed and I am sure the toner contents were spilled. remove drum assy. and remove toner unit off drum then blow out the drum only. This should

Question about HL 5250DN Laser Printer

1 Answer

JUST REPLACED THE DRUM IN NOV, 2010 AND THE LIGHT IS ON AGAIN. HOW LONG SHOULD THE DRUM LAST I don't think you need another drum. The drum should last a long time. Sounds more like you have a short in

Question about HL-4070CDW Printer

1 Answer

...do not expose to sunlight directly and also expose to the light as less as you can. Other Brands of printers has the drum in the cartridges, every time that you replace the cartridge actually you are ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...