Questions & Answers for: ptc

Ad

Question about Televison & Video

1 Answer

PTC 96012 Replacement On philips 25GR9660/22B Chassis a PTC 96012 (3 pin) is installed. It must be replaced because was burned, but this not available any more in market place. So a corresponding item

Ad

Question about 27PT5441 27" TV

1 Answer

...as soon as you turn it on. Hi there! Dead short in the power supply, possibly the rectifier or the PTC has failed. PTC located in the Primary supply at the point where the coil around the tube plugs ...

Ad

Question about Side by Side 26.0 Cubic Foot Total Capacity Refrigerator

1 Answer

...on the OLD relay. 1, 2 4 4 ect... make a simple wite color to terminal number sketch. PULL off PTC relay WITH terminals by pulling HORIZONTALLY (Usually to the left / 9 O'clock position) NOTE

Question about Side by Side 26.0 Cubic Foot Total Capacity Refrigerator

1 Answer

...needs to be replaced,It is bought in April 2003 If you have had recent power failures, OFTEN the PTC motor starter for the compressor gets fried. The part can cost $50 or if you shop online as low ...

Question about Side by Side 26.0 Cubic Foot Total Capacity Refrigerator

1 Answer

my fidge is a kenmore medel 25357685790 my starter ptc looks to be burnt so i decided to replace it but it includes three pieces the capacitor, starter ptc and overload. the new parts only have a ...

Question about Ptc 710 Portable Barcode Data Terminal

1 Answer

telxon PTC-710 just showing 66 on the screen screen just showing 66 You have no arc chip below the os chip or the ptc is not seeing it.

Question about Ptc 710 Portable Barcode Data Terminal

1 Answer

...for windows. are all windows dead, the motors.>? i look in alldata.com so can you. and its PTC 8 and 9 in the JB1, junc.box1. this fuse box JB has row of 10 PTC fuse in a line, dead center

printer show the code C4-02 about ptc.we removed clean and reinstalled ptc.it had been working for 1week after that same error code appeared.I re cleaned so it worked for 1day and now it doesn't work.

What number will I use to reset the PTC unit in sharp copier mx2600n Hi, I assume you have a C4-** code displayed. The PTC unit is failing, if you turn the copier off & on then this will reset the

IRN75HCC Ingersol Rand compressor. VSD fault 18 is supossedly a main motor PTC overtemp code, but there is only the hall effect sensor in the motor. where is this PTC thermistor? The PTC typically ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...