Questions & Answers for: remove spindle food processor

Ad

Question about KFP750 Food Processor

1 Answer

...spindle that comes up from the base of our KitchenAid 12 cups food processor KFP750WH0 splintered and broke while we were using it. We ordered a replacement motor sleeve shaft part number KA8211849 ...

Ad

Question about DLC-8S Pro Custom Food Processor

2 Answers

spindle on Cuisinart DLC-7 Food Processor How do Ireplace the spindle on Cuisinart DLC-7 Food Processor You need to pull the old one off, probably with vise grips and a lot of effort, and then order a

Ad

Question about 5100 Cuisine Systeme Food Processor

1 Answer

...occurred with making some pasta dough using the blades, when the the dough got into a ball, it was removed but the blade is stuck on. You need to replace the spindle i'm afraid which gets worn after ...

Question about 5100 Cuisine Systeme Food Processor

1 Answer

food processor appears to have welded itself into the bowl making removing it and getting the bowl with content off the spindle impossible. Can anyone help? fill with hot water, see if that helps. You

Question about KFP740 CR Food Processor

1 Answer

...remove. With a DLC-7SP, I grabbed the spindle with some pliers, channel locks might do well and put a handle of a screwdriver between the pliers and the top deck and pried. Second attempt and it ...

Question about KFP740 CR Food Processor

1 Answer

...Remove Inner (Perspex ) bowl to clean - plastic top of central spindle won't come off ! that top part is supose to come right off. try a little very hot water to "melt" any tiny bit of food that may ...

...remove the blade attachment when done. What the? Finally got it off as per FixYa advice only to find both spindle and attachment stripped. The bowl handle was cracked due to aggression (don't ...

Question about KFP750 Food Processor

1 Answer

...spindle will come off. Then you need to remove the motor shaft sleeve in a similar manner, I drill a hole in the end and use a shackle and chain attached to the post for that one. I use the leg of my ...

Question about KFP740 Food Processor

1 Answer

Spindle / shaft or mixer bowl? Hi. My 9 cup food processor has stopped working. Trying to narrow down the problem. I can hear the motor trying to work, but nothing spins. The interlock system on the ...

Question about 5100 Cuisine Systeme Food Processor

1 Answer

...spindle Yes you can, you can "cut" it off with a soldering iron by melting a slot down one side. When banging a new one on you need to remove the base and suppert the bottom of the shaft with ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Food Processors Experts

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

30504 Answers

Are you a Food Processors Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...