Questions & Answers for: Frigidaire rubber door boot

Ad

Question about ATF6000ES Front Load Washer

1 Answer

rubber door boot and leaving rubber marks. However, normally this will be associated with a leak somewhere. Inspect the entire door boot and clean in behind the rubber. Inspect for any rips, tears, or

Ad

Question about Affinity ATF7000E Front Load Washer

2 Answers

...rubber boot inside door. I have a Frigidaire front load washer that I purchased late 2006. The gray rubber boot inside of the door has developed a black mold that will not come off. I have tried ...

Ad

Question about Affinity ATF7000ES Front Load Washer

1 Answer

...rubber seal on the door and opening of my fron loading washing machine has turned black with, what I suppose to be, mildew. I have scrubbed and wiped to no avail. What do you suggest? at this point, ...

Question about ATF6000ES Front Load Washer

1 Answer

RUBBER RING THR RUBBERING INSIDE THE WASHER CAME OFF Assuming you are talking about the boot seal that attaches from the tub to the door of the unit. There is an inner and outer spring that holds the ...

Question about ATF6000ES Front Load Washer

1 Answer

...can go on, usually with the spring to the left side, but it's prefference. the clamp will simply go on around the rubber and hold it in place. The door makes the pressure seal. Hope this helps. ...

Question about ATF6000ES Front Load Washer

1 Answer

...rubber on the inside front of the washer ("the door boot") gets very dirty, slimy and is all stained. As I pulled the rubber back to clean it, it was digusting ! It is starting to leave marks on the ...

Question about ATF6000ES Front Load Washer

1 Answer

...THERE IS A TINY SPRING CLAMP THAT GOES AROUND THE GREY RUBBER BOOT AT THE DOOR OPENING. THE BEST WAY TO REMOVE THIS IS AT THE BOTTOM 6 O'CLOCK POSITION. THEN UNATTACH RUBBER BOOT FROM DOOR

Question about ATF6000ES Front Load Washer

1 Answer

...rubber door boot. It is located behind the rubber seam where it attaches to the door frame. Follow this hoop around to the bottom of the door opening and locate the wire tension spring. Gently pry ...

Question about ATF6000ES Front Load Washer

1 Answer

...door lock you will need to take off the spring that holds the rubber boot inplace,you will have to lift the edge of the boot and look on the bottom you will see the spring, once the boot is removed ...

Question about ATF6000ES Front Load Washer

1 Answer

...rubber grains on the glass part of the door, I assume from the rubbing. I noticed that the front of the basket is not centered on the front half of the tub. It appears to be sitting higher than ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machine Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

J. Bradshaw

Level 2 Expert

121 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...