Questions & Answers for: Kenmore rust oleum paint

Ad

Question about 83142 Electric Dryer

1 Answer

rust - if you wanted to paint it, clean as much rust off as possible first, buy a "rust converter" product from a hardware store and a really good quality enamel paint designed for metal with a primer

Ad

Question about 22422 Top Load Washer

1 Answer

...paint but it still rust through. It's a problem because rust gets on my clothes. Is there any solution? Does anybody else have this same problem with there washer? Use Oxylic Acid Crystals dissolved ...

Ad

Question about 24032\24036 Top Load Washer

1 Answer

...Have Kenmore Heavy Duty 70 series washer. Some of holes in tub are starting to get rust and spreading you can get appliance tochup paint at your local appliance parts store,they have many ...

Question about 98702 Stacked Washer/Dryer

1 Answer

...lent trap on the inside back wall I recommend removing the rust with some emory cloth, priming the area with a metal primer such as rustoleum, and then painting the area with appliance paint to

Question about 24032\24036 Top Load Washer

1 Answer

...and cause rust spots on my clothes. that is very possible.the best thing to do is replace the lid or sand all the rust off and you some rust inhibitive paint to helpslow or stop the rusting

Question about 62602 Electric Dryer

1 Answer

...rust in the felt seal rub area if you do not allow the paint to dry well before reassembly it will end up flaking off on your clothes. Here is the drum seal with adhesive: ...

...Rust-Oleum appliance touch up paint (multiple coats) to cover the problem areas. The Rust-Oleum costs about $4.00 . In order to get access to the tub, see the following: ...

Question about 24032\24036 Top Load Washer

2 Answers

...rust you'll have. You can find that paint at any HomeDepot or most Hardware Stores. They have it in spray can and nail polish size to apply with a tiny brush. Don't forget to rate this post!! Check ...

Question about 53642 / 53644 Side by Side Refrigerator

2 Answers

...PAINT IT? Yes for sure, youmust first remove all the rust, remove the beadings gaskets and use a primary coat of rustproof primer. Now use some tinkering with levelling and cleaning with water paper ...

Question about Elite 79203 Microwave Oven

1 Answer

...given off during cooking. If your fan is not working or your vents are blocked, the moisture stays inside and hence; rust. You could repaint by doing a bit of sanding and using a tremclad rust

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kenmore Dryer Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Ned Halaweh
Ned Halaweh

Level 2 Expert

240 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...