Questions & Answers for: sharp al series

Ad

Question about AL-1551CS Copier

1 Answer

Sharp AL 1551 CS RSPF not feeding I have a Sharp AL 1551 CS with a Reversing SPF attached to it. It was working, and now it isn't. For some reason, the second set of gears/rollers to feed and pull the

Ad

Question about AL 1631 Copier

3 Answers

SHARP AL-2040CS Drum reset code installed a new drum and the drum light will not go off. I understand there is a reset code. Also this 2040cs does not have a keypad. c - auto - c - auto - (machine is ...

Ad

Question about AL-1642CS Copier

1 Answer

cod Hello, Please I´dn like to know all the drum cods for Sharp series Al 1000 printers Thanks The codes are C Auto C Auto display off, press 24 print 7 print , 00 will display then press C twice

Question about AL-1642CS Copier

1 Answer

...Sharp AL-1644 Hi, is it possible to reset the drum counter on a Sharp AL-1644? Thanks This works on MOST sharp AL series copiers. Press these keys in sequence: Clear → Density select ...

...Sharp AL series H4 code reset. Your Xerox XD series copier is made by Sharp and was a Sharp AL series copier. The reset procedure is the same. If the reset fixes the problem please leave feedback for ...

H4 code flashing. turned it off and back on...still flashing. anything else we could try? See my tips and tricks solution for this problem on this site. Just search for Sharp AL series H4

...all I get is a "L" then back to a "1" You can find the solution to this error by viewing my tip for this problem. Just search for Sharp AL series L1 on this site Good Luck and Thank You for using ...

Question about AL-1641CS Laser Digital Copier

1 Answer

...Sharp AL series copiers. In fact here is the link just in case you have an L-1 problem. http://www.fixya.com/support/r4378514-sharp_al_series_copier_l1_l_1_error_code If it works for you then please ...

sharp AL 1551 CS is getting a L1 error code before that it was getting a E7 code. The scanner will light up and shut right back down, then it shuts itself down again. I have a tip posted here on Fixya

Question about AL 1631 Copier

1 Answer

...Sharp AL series machine just run and run it means they are low or out of toner. This is especially true if you are hearing a light thump thump noise while it is running. Just let it run and after 5 ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...