Questions & Answers for: Chevrolet Silverado 1500 shift module

Ad

automatic transmission will not shift into higher gear pick up has always done great . Get in it wont shift out of first.Have had no transmission problems.Will not manually shift.Is there a fuse or ...

Ad

...shift to next gear. What further can I do? What do you recommend next for repairing? Is it a module problem or something else? check the governor for sticking valves drive gear worn.governor weights ...

Ad

...shift control module via CKT 1567. Transfer Case Shift Control Module The transfer case shift control module uses the VIN information for calculations that are required for the different calibrations ...

...shift are not met. A fast blinking light means there is a fault in the system, and the codes would need to be read by a scanner, in the transfer case control module, leading you to the cause. ...

Question about 2005 Silverado 1500 2WD

1 Answer

...shift and when you take off it is in 3rd gear Has the Powertrain Control Module (PCM) been tested for fault codes? if not get this done firs. This transmissions shifting is controlled by a computer ...

...shift control module should not need replacement. DO NOT replace P/N 15749703 unless diagnosis points to the module as the malfunction.Replace the transfer case shift control switch using published ...

shift control module starts monitoring the transfer case shift control switch to determine if the driver desires a new mode/range position. At a single press of the transfer case shift control switch,

...a&b circuit and gear shift module communication circut codes came up is that what would cause this There is no one thing that can cause this. Careful diagnosis is required to track down the

Question about 2000 Silverado 1500

1 Answer

...shift control module. The encoder houses 4 Hall effect sensors that are used for channels P, A, B, and C. These sensors provide a path to ground, when a magnet, (part of the Motor Encoder), passes ...

Question about 2000 Silverado 1500

1 Answer

Module (PCM) detects a continuous open, short to ground or short to power in the 2-3 Shift Solenoid (SS) valve circuit, then DTC P0758 sets. Possible symptoms - Engine Light ON (or Service Engine Soon

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...