Questions & Answers for: shredder bin jammed

Ad

Question about Fellowes Office Equipment & Supplies

2 Answers

...of the button, the "bin full" light comes back on. I have the Fellowes C-320-C shredder. you will have to clean or replace the bin full sensors where can i find the bin sensors on Spl tmc16a ...

Ad

Question about 10X Shredder

1 Answer

...shredder? PX1000MS Platinum Remove the waste bin from the front and empty. If you have it jammed so full the bin wont come out I have heard people say that they got the bin out when they turned the ...

Ad

Question about PX1000MX Shredder

1 Answer

...bin so full it is stuck/jammed full of paper and you now can't remove it...this is a "consumer" model machine and to keep cost low they do not provide a "bag-full" light on the panel...you should ...

Question about PX1000MX Shredder

1 Answer

...shredder will not operate when the bin is full. Regular oiling is also necessary for proper performance. It is recommended to use the shredder oil every few weeks. Maximum running time: 3 minutes ...

bin base and plug the shredder back in. Rock the shredding direction back and forth between forward and reverse. Pull on the jammed pieces as the shredder shifts between directions. 3 Run the shredder

Question about MDM6000 6-Sheet Micro-Cut Shredder

1 Answer

shredder has a bin, you can gain access to the shredding mechanism by removing the bin and turning the shredder upside down. With power disconnected, be prepared to spend considerable time picking out

...button? Cleaned out. Unplugged and plugged back in. Is there a secondary lock to prevent operation when not on the bin? Is the shredder the right way around on the bin? Is a lug on the bin

Question about MDM6000 6-Sheet Micro-Cut Shredder

1 Answer

...There is an interlock that prevents the shredder from operating without the bin in place. Something may be jammed in the interlock or the bin may not be closing the interlock as it is slid in

...shredder has a removable bin, remove it and turn the shredder upside down. With power disconnected, remove all bits and pieces of paper you can find. I have used tweezers, a utility knife and other ...

Question about MDM6000 6-Sheet Micro-Cut Shredder

1 Answer

bin. The shredder is seated on the collection bin if that is the bin in question. There is no odor of burn failure and everything turns accordingly as I manually turn the motor. Your thoughts? The bin

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...