Questions & Answers for: ElectroVoice sound dynamics speakers

Ad

Question about ElectroVoice Audio Players & Recorders

1 Answer

...sound then there is a problem with the crossover(this is the pc board in the enclosure that connects to the speakers)if not your horn is gone.hope this helps,thanx for using fix.please rate all ...

Ad

Question about RE20 Professional Microphone

3 Answers

Electrovoice RE20 will not work with my board... My board is a Mackie 1202-VLZ Pro... Phantom Power is on... My $20 Radio Shack mic works but the RE20 will not... No sounds comes out of it what so ...

Ad

no sound from EV SH-1502 ER 15" driver These 1502 EV's sound great, but one has nothing out of the 15" low driver, the horn is fine, and loud, but no low hz from the low driver. I checked to make sure

Question about http://www.electrovoice.com/products/70.html Amplifier

1 Answer

The radio is on, no sound comes on, all wires checked The XM is hooked up to a Bose radio, which was working just fine until I tried it yesterday. The screen in the box is lit with the channel showing

Question about . Speaker

1 Answer

...sound the speakers appear to sound OK. Does this sound like a foam repair. These were very good speakers when we bought them quite a while ago. Thank you, Jim Without the foam they will definitely ...

Question about Ev Zx4 15" 2way Electro-voice Speaker Club PA Dj New? 

1 Answer

I think one of my zx4s is blown. it sounds a bit fuzzy while the other one is clear. I could not seem to get enough volume out of my PA and my guitar pedal (which I plug into stereo channel in desk) ...

Question about Ev Zx4 15" 2way Electro-voice Speaker Club PA Dj New? 

1 Answer

speakers but lately on speaker is giving me problems. It cuts in and out and the bass sound goes thin and the sound distorts. I have checked it with different leads and amp but still giving Problem it

Question about Force i 25 Dual 15" 2 Way Passive PA Cabinet

2 Answers

...speakers force I 25 and they stopped working last night. We cant figure out why. There is no sound at all, any ideas? The first step is to eliminate problems with other items of equipment. Speakers ...

...speakers and a mackie2600 amp. Last night on my amp one side was working the other side the bottom light was lit but not moving. No sound from speaker. I wiggled the wire it started working then ...

...speakers. Attention to the dynamic requirements of low frequency reproduction resulted in combining a high efficiency transducer (DL18BFA) with an amplifier capable of 650 watts of dynamic power. Its ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top ElectroVoice Audio Player and Recorder Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you an ElectroVoice Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...