Questions & Answers for: Eaton trip

My Eaton 20 amp Arc fault breaker tripped during a storm this morning. I tried the usual turn it off and back on deal and its still tripped off. It has a test button, which ive tried in the off and on

arc fault breaker trips sporadically I have a new home (constructed 3 yrs ago) that has an arc fault breaker that runs the guest bathroom and one bedroom. Almost never use the guest bath and the ...

Eaton Arc Fault Breaker type BRAF tripped. I reset it but lights will not work. Ideas please? My arc fault breaker trips in my bedroom when ever a load is put on line. The trunk line comes into a ...

I have a 240V hot tub and when I turn on the Cutler-Hammer GFCB250 GFI Circuit Breaker, 50A, it trips immediately. I spoke with a tech support guy from the hot tub mfr who says that the heater and ...

There are 9 Eaton arc fault breakers in our service panel. All 9 keep tripping for no apparent reason; they get reset and may stay on several hours before they ALL trip again. Did they all go bad? ...

i have 3 bedrooms, each have their own arcfault breakers. i plug in a sawzall and one bedroom trips, fast at the end of the circut an takes longer at the begining. i have chect for shorts, removed and

...circuit breaker in the panel: 1) Clear the source of the fault.2) Push the breaker handle from the "Tripped" (or mid) position to "Off"3) Push the breaker handle from "Off" to "On"That's it. Most ...

15amp Eaton Arc fault breaker type BRAF trips every day at same time. There are no high amp electrical things plugged in. What is causing this? should I have it replaced? "Arc fault" breakers trip ...

no power to two outlets other two work in the room on the same grid circuit box isn't tripping i;m getting no power to two otlets , In the same room two light switches are working on the same grid, ...

What voltage and amperage is required to trip a shunt trip unit The circuit breaker will have a shunt trip voltage & current ratings, a variable current selector knob, etc. - based on the type ...