...picture freezes and turns to purple duo-tone. What to do? Sounds like the PIP feature is causing the problem with the TV if you are connected directly to cable TV without a box inline and getting ...
...picture on 42" plasma TV. Daewoo #DP-42SM. Sound works, but I get a frozen image on the display that could best be described as "Multi-colored Burlap". Thin 1/8" horizontal and vertical colored ...
Question about LE26R73BDX 26 in. HD-Ready LCD Television
...picture in digital mode but with the channel name and mono frozen again and again unable to change channel. Solution that worked for me: Beware: Although the process should be safe, it technically ...
TV for 5 minutes and plugging it back in. If you cannot get a picture from any device such as a DVD player and cable then your TV needs serviced call a repair man. Good Luck! What did you find as your
tv and the picture goes out with a 1/2 inch picture line across the screen. Then in a few minutes, it comes back normal. Sometimes there is a thin line at the bottom of the screen. Should I replace it
Question about 32PFL5403D/27 32 in. LCD TV
tv (power cycled it) and it still has this problem ... frozen with no picture and no sound. How a screen can be frozen with no picture, I'm not sure. But it sounds like you are going to be on your way
TV has frozen while out of the room and it has been for a period of time, the last picture where it has frozen is still visible on the screen. Eventually fades away. Sometimes when screen is frozen it
TV turns on, but a picture from previous channel I was watching is frozen to the screen. I've unplugged cable cable card and connection to cable service and picture is still frozen on screen. Will not
Picture is frozen onto the screen. Tried powering off tv and cable box that did not work. Next unplugged TV and that did not work Sounds like a burn in, this is common when some still image is left on
Question about 60IN LC-60E88UN AQUOS LCD HDTV 240HZ 4MS 4 HDMI Refurbishe
...tv picture frozen screen? If it is frozen on all inputs, you likely have an internal problem. Try some of the other inputs to see if it will function using them. A weak DVT signal can also cause a ...
Usually answered in minutes!
Step 2: Please assign your manual to a product: