Questions & Answers for: universal joint

Ad

...unIVERSAL JOINT OFF A 81 JEEP IM NOT SURE HOW TO GET TO THE FRONT UNIVERSAL JOINT WITH LOCKING HUBS the axle joint? this is my problem.i have a 84 jeep body with a 81 jeep frame.with locking the 4x4 ...

Ad

Question about 1995 F150 Styleside Regular Cab

1 Answer

...universal joint. Pull the drive shaft out of the transmission tail section and remove the U joint from there - the same way. Now, with caution not to lose the needle bearings in the U joint caps, ...

Ad

...Universal Joints on the front of my 1997 Dodge Intrepid? Cv joints in your intrepid? Remove the tire, unbolt the lower ball-joint, Remove the hub nut, pull outer joint from wheel bearing, pull shaft ...

Question about 1996 Explorer

1 Answer

...universal joint retaining straps from the rear differential yoke. 3Pull the drive shaft and universal joint away from the rear differential yoke by hand. 4Remove the retaining rings that hold the ...

...universal joint is either worn and/or there is no grease in the jount. Check the joint for wear by holding one side of joint and trying to twist shaft on other side. If no apparent wear you can ...

Question about 2000 Grand Cherokee

1 Answer

...normally. If the problem just started or has become increasingly worse, it could be due to worn universal joints. The universal joints couple the drive shaft to the drive axle and the

Question about 2000 Grand Cherokee

1 Answer

...we thought they sold us the wrong part. When you replace the bearing you have to make sure the universal joints are lined up. Look at the front shaft, the way the universals joints are located, ...

...universal joint on a 1995 pontiac firebird how do i remove the rear universal joint from the drive shaft Usually there are two clamps that come off, then the joint caps are  pressed out of the ...

Question about 1995 Firebird

1 Answer

...universal joint how do i know for sure its the universal joint visually inspect for tell-tale rust powder, or physically remove shaft and feel joints...if you remove shaft though, may as well do the ...

...to use a 371 precision universal joint product super strength heavy duty high performance joint how do I remove the universal joint left front and right-front is it on the front driveshaft or ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85219 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...