Questions & Answers for: whirlpool washer no cold water

Ad

Whirlpool ghw9100lw2 front load washer doesn't use both hot and cold I have a Whirlpool ghw9100lw2 front load washer that only draws water from the hot water inlet, it doesn't matter if is selected ...

Ad

Question about GHW9100L Front Load Washer

1 Answer

Whirlpool top load washer AP595033 Water pressure is good, hoses clear, screen traps are clear. Water goes to washer but will not go in. On warm water cycle there is only hot. Your cold water celenoid

Ad

whirlpool ingis washer will not engage rinse cycle I have a whirlpool ingis washer 2 years old. It will not go into the rinse cycle. The washer does nothing when in the rinse cycle. The washer will go

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Whirlpool washer new..,. washes cold wash cold rinse.. hot wash cold rinse.. but on warm wash is cold wash cold rinse I can send wasdher back just got it t0 day or is there something I can do? Be sure

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...whirlpool washer and the cold water will only drip into the washer. I can only get very hot water to come out. When I put it on warm or cold, it buzzes, but only drips cold water. Any suggestions on ...

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...whirlpool washers have a cold water rinse . Turn the washer on the first wash and set for cold/cold . If no water goes in , then the water valve is the problem . Provided that the lid switch is good

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...whirlpool washer/dryer combo for condos works fine except for the water temperature setting. When I set it for cold water, the clothes would be really hot after the load is done. The temp setting ...

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Whirlpool Washer LSQ9010PWS will not fill with cold water. I have to disconnect the hose from the washer and fill it by placing the hose in the tub and turning on the cold water valve. The hose and ...

...Whirlpool LXR6232EQ Top Load Washer - no cold water on the cold/cold or warm/cold wash cycle settings, nothing on cold/cold, and only hot on warm/cold?? Replaced water inlet valve and the temperature ...

Whirlpool washer letting both cold and hot water in when I only ask for cold water... I have a Whirlpool washer LSB6300PW2. When I set the washer to use only Cold water, the washer begins to fill with

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Brad Brown

Level 3 Expert

18139 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...