zigzag stitch, and dropped in a #1 cam, set the stitch width at 3 and the length at 2, but only get a straight stitch. Help! Before you put the cam in did you make sure the machine was set on straight
Zigzag stitch only stitches on the left side. if the zigzag stitch only stitches on the left side it's very possible that the cam or gear inside that does the zigzag stitch is either worn out or ...
Question about Denim Star SW210
zigzag stitch. when I turn the knob to any other stitch it gives me the right stitch except with straight stitch. so I can do herringbone, all forms of zigzag even the 3 straight to form a zigzag, but
zigzag stitch not catching when doing zigzag or blanket stitch only catches a few stitches..have a straight line of stitches then a zigzag more straight line try these suggestions and see if they ...
...It only does straight stitches. There are similar models that have a stitch width lever. Those do zigzag stitches and straight stitch when in the zero width mode. I hope this helps. Cindy ...
...stitch zigzag My singer 1120 is not stitching a zigzag stitch correctly. The top of the stitch is coming out with an extra piece of thread under the zigzag or other times it comes out with no zigzag ...
...zigzag stitch is another popular choice, as is a straight stitch worked back and forth over the area: http://www.running-w-scissors.com/2014/01/tutorial-patch-mend.html If you're just mending a seam ...
...component, like a blind hem stitch? Some machines consider straight stitch to be a zigzag stitch of width=0, while others have separate settings for a straight stitch and a zigzag (or other)
Question about 1120 Mechanical Sewing Machine
...705 to go from straight stitching to zigzag stitching see if this link will help you out. Zigzag Stitch iFixit or this one. Bernette 705 to go from straight stitching to zigzag stitching
Usually answered in minutes!