Andis Irons - Page 5 - Recent Questions, Troubleshooting & Support

For more info about Iron keeps blowing trip when turned on:

Dial 1 844 441 2440 for free Garmin map update technical support

Irons | Answered on Mar 25, 2019

I imagine that it would be the water valve not closing, allowing water to continue to enter the steam chamber. I have no idea how to get into these to have a look.

Irons | Answered on Mar 22, 2019

First thing to try is descaling it. Most manuals are online, Google
make model manual

Cleaning a Laundry Iron
Get some CLR descaler and mix it to the directions. Turn the iron on and set it to steam. Turn the iron off and put the CLR into it. When it has cooled a little, sit it faceplate down in an oven proof dish. Leave it over night. The CLR will drip through and sit in the dish cleaning the inside, and the topside of the soleplate. The next day, fill with water and shake upside down to empty any remaining CLR and scale through the fill hole. Keep filling and shaking to empty until the water comes clean.

If you don't want to use CLR, you can use white vinegar undiluted.
Cleaning Laundry Iron

Irons | Answered on Mar 21, 2019

I'm having a similar problem. I've used mine quite often a few years ago and went to use it recently and now no steam. I've taken my fcl-ss167 apart and there is a water filter inside the base. The water filter may be too full of calcium carbonate to pass water. The water filter is removable but I have not yet found one to replace it.
Photo supplied.

Irons | Answered on Mar 18, 2019

I would go online to the manufacturer's web site for the information.

Irons | Answered on Mar 16, 2019

Not here! We are FIXYA dot com, we are not who you think we are :>)

find the email confirmation, look for a phone number or an email address.

Irons | Answered on Mar 14, 2019

Failure of heating element or control

Irons | Answered on Mar 10, 2019

There are no user serviceable parts in this device. unplug it for 2 minutes- make sure the reservoir is filled with water, and the power is off- plug it in and turn thee power on- wait for the ready light to illuminate and try to use it.
good luck

Irons | Answered on Mar 02, 2019

Not finding what you are looking for?
Andis Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Andis Irons Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers


Level 3 Expert

85223 Answers

Brad Brown

Level 3 Expert

18165 Answers

Are you an Andis Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides