Andis Irons - Page 6 - Recent Questions, Troubleshooting & Support


You are probably not holding the iron the right way! Don’t hold the iron upside down, or don’t put too much water in at a time. Make sure that the heat on iron is turned up hot enough to burn the water fast enough so it doesn’t leak.

Irons | Answered on Feb 12, 2019


The display is flashing constantly?

It likely has a "defective" thermal fuse, same junk part that fails in perfectly good coffee makers.

Irons | Answered on Jan 29, 2019


Is it a power on light? an illuminating instrument light? Many of these units have gas-filled (Neon) type lights in them and when they start to fail they flicker most times before they go completely. Not to worry though it doesn't mean the unit itself is failing. If it is the light you'll just have to do as my mother did back in the day and lick the tip of your finger and quickly tap the face (Hot Part) If hot it will make a sttt sound.

Irons | Answered on Jan 19, 2019


Is it a power switch that lights up? Many of these units have gas-filled (Neon) type lights in then and when they start to fail they flicker most times before they go completely. Not to worry though it doesn't mean the unit itself is failing. If it is the light you'll just have to do as my mother did back in the day and lick the tip of your finger and quickly tap the face (Hot Part) If hot it will make a sttt sound.

Irons | Answered on Jan 19, 2019


GOOGLE IT

Irons | Answered on Jan 08, 2019


DID YOU NOT READ YOUR MANUAL WHEN YOU GOT IT . IRONING WENT AWAY HERE WHEN THEY CAME OUT WITH WASH AND WEAR CLOTHES DO NOT THINK MY WIFE HAS EVER IRONED ANY THING IN 54 YEARS

Irons | Answered on Jan 08, 2019


Most likely it is a broker electrical wire that makes random contact ( in / out) when the iron is being moved. You may have to disconnect the iron, take the upper covers out, look for broker wires and replace the wire

Irons | Answered on Jan 03, 2019


Since the new iron does not have a cleaning button, use distilled water only. Also, cleaning with a mild vinegar solution will help keep it in good shape. Just be sure and rinse the solution out.

Irons | Answered on Jan 02, 2019


Marion, I've scoured the internet and I am stumped. I'd call Walmart or someone that sells them and see if they've got one laying around or email the company.

Irons | Answered on Dec 30, 2018


we dont know why you iron doesnt work...maybe its old?? maybe its broken???

Irons | Answered on Dec 26, 2018


it is defective. you should not use a steam press (make and model unknown) when it has a leak and water could possibly contact the electric power circuit. this could be a life threatening health issue.

Irons | Answered on Dec 21, 2018

Not finding what you are looking for?
Andis Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Andis Irons Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Brad Brown

Level 3 Expert

18121 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you an Andis Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...