Avaya Computers & Internet - Recent Questions, Troubleshooting & Support


From the desk phone:
- Leave the receiver in the cradle
- Select #9

You will hear 3 short tones (blip-blip-blip) and the phone will return to normal ring mode.


By default these are the feature codes for the SAC (send-All-Calls) feature:
*9 to activate SAC
#9 to deactivate SAC

Avaya 4610 | Answered on Oct 22, 2019


turn the profile to normal and the ringtone to a loud one. make sure the volume is up. ensure there are no diverts set.
You can reset to factory default and setup from scratch if you have difficulties locating the error

Avaya 9611G | Answered on Aug 15, 2019


at home? what router?
wifi
3/4/5G wireless
Ethernet wired ?
Avaya 1608 is telephone not a computer, at all.
I guess VOIP? yes,
does it work with all systems (NO)
do you have the manual googling for it works , do so?

Avaya Computers... | Answered on Apr 15, 2019


The Avaya 1608-i is a full-featured IP phone with 9 programmable line and feature appearance buttons. It is an excellent choice for an everyday office worker with medium to high call volumes.

Avaya 1608 IP... | Answered on Mar 29, 2019


Check if the light is off on all phones. If resetting the message waiting indicator light did not resolve the issue go on to the next steps. Reset all phone sets by unplugging them from the jack and power source. ... Verify that the light is off on all phones.

Avaya 1608 IP... | Answered on Mar 25, 2019


This is all I could find out about lldp.

https://en.wikipedia.org/wiki/Link_Layer_Discovery_Protocol

Avaya 9630G | Answered on Mar 21, 2019


TRY UNPLUGGING IT FROM THE POWER SUPPLY .

Avaya 1403 | Answered on Mar 01, 2019


I Think you are missing the ink, look for Wich ink you are missing

Avaya Ethernet... | Answered on Oct 28, 2018


AVAYA 1608 I (RESET)
REMOVE THE CABLE AND RESTART THE PHONE ONE'S IT RESTART.
YOU WILL SEE THIS IN DISPLAY" *program" AT THAT MOMENT CLICK " * BUTTON ON PHONE"
THEN TYPE " 27238#". SO IT WILL SHOW THE SETTING'S OF PHONE THEN CLICK " # " UNTIL YOU REACH TO DISPLAY SHOWING " command" TYPE THE COMMAND AS " PRESS MUTE BUTTON AND CONTINUE 2723825327 # " THIS WILL REACH TO SHOW IN YOU DISPLAY TO CONFORM THE RESET CLICK "# TWO TIME" THEN IT WILL BE RESET.

Avaya 1608 IP... | Answered on Apr 21, 2018

Not finding what you are looking for?
Avaya Logo

Family Lines

617 questions posted

Ask a Question

Usually answered in minutes!

Top Avaya Computers & Internet Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

Vincent G
Vincent G

Level 3 Expert

2361 Answers

Duncan Mutch

Level 3 Expert

418 Answers

Are you an Avaya Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...