Lands Phones - Recent Questions, Troubleshooting & Support


Depends on your vmail system and telephone system. If you have a cadence vmail or svmi-8, you must go into system programming on your telephone system and program the key on the phone.

Samsung Prostar... | Answered on Dec 06, 2019


Enter the model of your VTech DECT 6.0 system into the search box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual.

Vtech DECT 6.0... | Answered on Dec 05, 2019


Hi sir. really i'm not shure about this function but try read this manual maybe can be usefoul.

http://www.ask-tsc.com/pdf/KX-T76xx.pdf

Panasonic... | Answered on Dec 05, 2019


FIXYA would have no information on it either . SORRY try search for LUCENT.com thru Google

Lucent 1872... | Answered on Dec 05, 2019


SORRY NO CLUE AS TO HOW THEY WORK . NEVER WORKED IN A PHONE FACTORY

Lucent Lands... | Answered on Dec 05, 2019


When pregnant, you should limit your caffeine intake. Tea has really low amounts of caffeine, so a cup every so often probably wouldn't be a problem.

Coffee however contains a lot of caffeine so it would probably be best to avoid it most of the time.

Lands Phones | Answered on Dec 04, 2019


If pressing the button has no effect, the phone(s) may be defective.

Lands Phones | Answered on Dec 03, 2019


Google (spirit)(410)(manual) without parens for instructions.

Lands Phones | Answered on Dec 03, 2019


DO YOU HAVE A DIAL TONE?

Binatone Lands... | Answered on Dec 03, 2019


Press the MUTE button

Lands Phones | Answered on Dec 03, 2019


If no dial tone, the problem is with your carrier.

Binatone Lands... | Answered on Dec 02, 2019


Sounds like the extension needs to be programed to ring for incomming calls.
Programming2.gif is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming2.gif by pressing the feature key followed by **266344.

When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.

At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number.
Enter extension number you wish to program ringing on.
Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear only
press the Chng key till it says appear & ring
press next key (lower right arrow)continue with the remainder of the incoming lines that you have on your telephone
press the release key when finished

NorStar M7208... | Answered on Dec 01, 2019


you could try takeing the battery out and puting it back in again, might work, all the best hope it works.

Panasonic Lands... | Answered on Nov 29, 2019


Thamizan Pulluvan junction
Channankari road
West Tamilnadu

Uniden Cordless... | Answered on Nov 29, 2019


try scrolling through the menu (keep watching the am to start flashing) then you can change it

Lands Phones | Answered on Nov 29, 2019


Google (binatone)(M250)(manual) without parens OR contact Binatone directly to request it.

Binatone Lands... | Answered on Nov 28, 2019

Not finding what you are looking for?
Lands Phones Logo

79,356 questions posted

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...