Champion Juicers - Recent Questions, Troubleshooting & Support

Soak it in Hydrogen Peroxide or vinegar.

Champion Juicers | Answered on Sep 20, 2019

Hello. This machine works on a back pressure system. You will find that the machine will work fine when you do a greater number of carrots or a larger number of apples. The two carrots or one apple are just "priming" your champion which is designed for a large capacity. Regards, Joe
And here is the instruction booklet just in case you do not have one:
PS kindly rate my answer. thank you.

Champion 2000+... | Answered on Jul 03, 2019

sadly when this happens , it is time to CHUCK it and replace with new one

Champion Juicers | Answered on Jan 10, 2019

FIXYA is not a manufacturer or seller of juicers.

You need to search elsewhere for assistance with repair or warranty replacement.

Champion Juicers | Answered on Mar 28, 2018

to the person. champion juicer running hot. if your blade is dull it will run hot bcuz its harder to turn and gets clogged easy. look online for new or less used blade.

Champion... | Answered on Jul 26, 2017

Parts from Champion website. You may need a new cutter, sometimes cheaper on ebay.

Champion 2000+... | Answered on Jan 28, 2016

I've been using my Champion for about 20 years, and have always used a very thin coat of olive oil on the turn shaft before sliding the cutter on. I've also used it before I've used the grain mill, and it has been fine.
If I were you, I think I would get out as much Crisco as I could with a chopstick (or something similar), put in some liquid soap, and some hot water. I would think that would loosen anything that was compressed or stuck. It might take a few times, but that's what I would try....or you could order a new cutter from Champion. I've had to order parts from them in the past, and they have been great.
Hope this helps.....

Champion Juicers | Answered on Jan 28, 2016

Where is the noise coming from?

Champion... | Answered on Jan 28, 2016

First, check to see if there is a set screw in the side of the cutter which screws against the shaft.

If no set screw, a gear puller would probably do the trick. There are many types -- you might luck out and find one which will fit on your first shopping trip.

Champion 2000+... | Answered on Jan 28, 2016

It's like a suction is created. I have had this happen. I managed to get mine off with a blunt knife to give a bit of leverage (not ideal I know to put a knife near an expensive piece of equipment but it worked for me) Once you have the blade cutter off I suggest oiling the metal prong that it sits on with something like vegetable oil or olive fairly regularly to avoid this happening again.

Champion Juicers | Answered on Jan 28, 2016

most likely the fan attached to the motor for cooling .try looking here

Champion... | Answered on Apr 13, 2015

Look in Yellow Pages , BEWARE Might br cheaper to BUY a new Juicer, as Repairs expensive.

Champion Juicers | Answered on Mar 11, 2015

there should be a fuel tap directly under the fuel tank. It should not be leaking fuel through unless there is a problem in the needle and seat ( staying open and not sealing off)

Champion Juicers | Answered on Feb 12, 2015

The manual that came with my juicer suggested putting a drop of cooking oil on the shaft to lubricate it before putting the cutter on. That works well for me.

Champion 2000+... | Answered on Dec 18, 2014

Ants OMG! what a nuisance. I suggest calling The Wholistic Research company who sell champions as they may be able to help

Champion Juicers | Answered on May 23, 2014

Not finding what you are looking for?
Champion Logo

112 questions posted

Ask a Question

Usually answered in minutes!

Top Champion Juicers Experts

Norman Al-Anbar

Level 3 Expert

630 Answers

ray gallant
ray gallant

Level 3 Expert

65457 Answers

Brad Brown

Level 3 Expert

18127 Answers

Are you a Champion Juicer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides