DeLonghi Heating & Cooling - Recent Questions, Troubleshooting & Support


DeLonghi CF210 Portable Air Conditioner Error code e6 ...

www.fixya.com > ... > DeLonghi CF210 Portable Air Conditioner
DeLonghi CF210 Portable Air Conditioner, error code e6 related issues. Get free help, solutions & advice from top DeLonghi experts.

Error e6 displaying on single split model one - Fixya

www.fixya.com/.../t4492271-error_e6_displaying_single_split_model
Apr 5, 2010 - Question about DeLonghi CF210 Portable Air Conditioner ... then the code error display E6 and the error code is Communication malfunction.

DeLonghi fix e6 error Air Conditioners Questions & Answers ...

www.fixya.com > Forum > Tags > fix e6 error > Air Conditioners
DeLonghi air conditioners fix e6 error related questions and answers. ... DelonghiFX400eco error code I Have the above air con unit 18 months old the cooling ...

DeLonghi CF210 Portable Air Conditioner Error code e6 split


DeLonghi Heating... | Answered on Sep 12, 2019


Have a look at the bottom where the drain outlet is and measure the size of the outlet. Its probably a 3/4 inch or 1 inch

DeLonghi Heating... | Answered on Aug 19, 2019


Would help to know what you are talking about? What shuts off? need info

DeLonghi... | Answered on Jul 22, 2019


might just need emptying

DeLonghi Heating... | Answered on Jun 20, 2019


I believe what you call a "key" is the symbol for Temperature. Here is an example of a Delonghi Tower Heater below. https://www.manualslib.com/manual/1432776/Delonghi-Hfx85w20.html?page=4#manual

DeLonghi Heating... | Answered on Jun 14, 2019


The Pinguino's exhaust pipe has to be attached to the window bracket to direct the air hot air out of the room, otherwise the room can't cool properly.
The owner's manual has several troubleshooting remedies for you to try:
1)  If the window is open, close the window. 2)  If there is a heat source in the room (burner, lamp, etc.), eliminate the heat source. 3)  If the exhaust hose is detached, connect the exhaust hose.  (My recommendation is to connect the exhaust hose to the window bracket and direct the air outside.) 4)  If the air filters are clogged, clean or replace the filters.
Remedies that aren't mentioned in the manual, but you might find helpful:
1)  Make sure that there are no kinks in the hose, and that the hose either remains straight or has a gentle curve when directing it into the window bracket.
2)  A sunny window reduces the maximum power and efficiency of the unit.  Placing it in a sunny window reduces your BTUs by at least 600, which means the maximum square footage of cooled space is reduced.  Cooling a kitchen requires at least 4,000 BTUs alone, which is nearly half of the unit's BTUs.  Try to place the unit by a window that receives minimum to no direct sunlight.
Finally, stating the obvious, if the room isn't cooling, the room is too large for the unit.  The PACL90 cools up to 400sqft.  Bear in mind that the air from these portable air conditioners cannot move around corners very well, so try to set it by a window in the central part of the room.

DeLonghi... | Answered on Jun 05, 2019


It's quite important for college students to know more about getting PhD. On https://essayclick.net/blog/how-to-get-a-phd you can read more about it

DeLonghi Heating... | Answered on Mar 18, 2019


It is part number HR1017, but it is no longer available at any parts house I could find. You should ask DeLonghi directly. There may be a foot from a newer model that fits.
https://www.delonghi.com/en-us/customer-service/online-inquiry

DeLonghi HHP1500... | Answered on Mar 04, 2019


Is this thing gone? Sure sounds like it - unfortunately

DeLonghi Heating... | Answered on Feb 18, 2019


Theres a little floatation type device in the removable tank that triggers a switch just above the tank on the unit itself. Just check that that isn't stuck in the "Full Tank" position. I had the same problem and jiggled the switch to make sure it could move and my A/C was back. Hallelujah!!! Hope it works for you...

DeLonghi CF210... | Answered on Jan 31, 2019


This unit has a safety device for overheating according to the manual... but no tip over shutoff is mentioned:
"SAFETY DEVICE A safety device switches the heater off in the event of everheating. To restart the heater, call the nearest service center. Note: when the safety device intervenes, the heater doesn't heat but the display works."
The manual also states that if it is unplugged ... all programming is erased.
So the heating element may have broken as compared to a safety shutoff turning it off...

DeLonghi Heating... | Answered on Jan 26, 2019


Check the thermal fuse of your heater and the thermo disc, if one of them is not working replace the defective part. You can test them by using a multi-tester for continuity with the main power of the unit switched off.

DeLonghi Heating... | Answered on Jan 11, 2019


The oscillating hardware may have failed.

DeLonghi Heating... | Answered on Jan 01, 2019

Not finding what you are looking for?
DeLonghi Logo

1,702 questions posted

Ask a Question

Usually answered in minutes!

Top DeLonghi Heating & Cooling Experts

Paul Carew

Level 3 Expert

3480 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Michael Youngman
Michael Youngman

Level 2 Expert

296 Answers

Are you a DeLonghi Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...