DISH Network Televison & Video - Answered Questions & Fixed Issues

Hola! Siga este vinculo, seleccione el modelo de control (este se encuentra en la parte de atras del control) Una vez usted haga esto, seleccione el tipo de aparato al cual necesita programarlo Y despues la marca de la TV. Una vez usted haga esto le aparecesaran los codigos que posiblemente funcionan con su TV. Si tiene preguntasadicionales, sientase libre de contactarme a:

Kimberly Escobar
Social Media Representative

DISH Network IR... | Answered on Dec 27, 2019 | 1,411 views

Quiero modificar un control dish 1.5 a una tv Lg... Me pueden dar los codigos xfavor

DISH Network IR... | Answered on Dec 12, 2019 | 3,516 views

Este control no tiene luces y ning?n c?digo funciona a?n baj?ndose de la internet

DISH Network IR... | Answered on Oct 06, 2019 | 558 views

Hi I will be more than glad to assist you in this concern. First press the power button on the front panel of the receiver for 10secs. once you press it the receiver will turn off and it should turn on by itself, once it turns on by itself you will see attention 015, press the menu button on the upper left of the remote, once you see the menu button press 6, 1, 1 on the remote and it should show on the screen point dish, select on check switch, once u are on the installation summary screen, select on test and it should do a test of 1 of 3 or it depends on your sat orbital location that u have.. once its done, it will show the installation summary screen and you should see sat input 1 & 2 with port1 up to 2 or 3 depends on your sat orbital location, all the trans on the sat 119, 110 or 129 if you have should be ok and green. once you see that all ok, select done on the screen, and it will be back to point dish, select done again, and then cancel all the way out of the menu, it should show on the screen attention 015, let it finish until it download the programming guide, once its done it should show a tv pic. press the dvr button and access your recorded event, it should play the dvr event. if the problem still exist, unplug the power of the dvr from the power outlet for 1 minunte then plug it back again and it should acquire the sat signal and download the programming guide, once it shows a pic. press again the dvr button and access the recorded event. it should play the recorded event, just incase the problem still exist, check what will be the exact error msg, write it down in a piece of paper and please feel free to get in touch or you can call on order to for the dish tech support replace the receiver, this is a dvr lost of function.

DISH Network... | Answered on May 28, 2019 | 3,056 views

You can Google the exact model number of your TV. One of the pages that comes up will be from the manufacturer and will contain the manual under SUPPORT or DOWNLOADS.

DISH Network... | Answered on May 22, 2019 | 42 views

The VIP722 always runs hot. A build up of dust can restrict air flow and cause overheating. When I had the VIP722, I had a small USB powered fan at the left-rear corner of the box to force cooling. I switched to a Hopper 3 and found the external cooling was not necessary. Hopper 3 has 16 tuners, so you never have conflicts.

DISH Network... | Answered on May 22, 2019 | 89 views

This may be what you are seeking.

I am assuming you have the DVD installed with the DISH. If not, the procedure can be googled.

DISH Network... | Answered on Apr 30, 2019 | 33 views

Did you connect to the output of a box? If so then it will usually come through your him I and doesn't require a scan. If cable set your menu setting to cable and not antenna.

DISH Network... | Answered on Apr 23, 2019 | 25 views

Just go to the DISH website for instructions and download the manual

DISH Network... | Answered on Feb 10, 2019 | 30 views

Ola necesito programar mi control original de pantalla JVC pero no se como

DISH Network IR... | Answered on Sep 24, 2018 | 2,536 views

Hola necesito c?digos para TV Seiki ya que extravi? el manual de antemano les agradesco

DISH Network IR... | Answered on Sep 13, 2018 | 1,541 views

notify provider for assistance

DISH Network... | Answered on Jul 30, 2018 | 60 views

go to input or settings for input and choose cable or satellite not antenna

DISH Network... | Answered on Jul 19, 2018 | 57 views

Quoting from link shown:

How do I cancel my WWE Network subscription?
To cancel your WWE Network Subscription:
  1. Go to
  2. Login to your account, if you are not yet logged in.
  3. Go to the Billing Information section of your account page.
  4. Click the "cancel your subscription" link.
  5. On the next page click the Cancel button.
If you subscribed to WWE Network through your Apple TV and are being billed through an iTunes account, click here for instructions on how to cancel.

Your subscription will remain active until the end of your current billing period.

DISH Network... | Answered on Apr 25, 2018 | 82 views

Get a hold of dish network, you don't own the receiver it would be up to them to service it or replace it, but that doesn't sound normal for it to run all the time

DISH Network... | Answered on Mar 22, 2018 | 1,038 views

HDMI 1 if your going to be watching it more than other programs or HDMI 2 if you have cable and spend a lot of time on it. Personal preference is 2.

DISH Network... | Answered on Mar 06, 2018 | 45 views

What input are you using?

DISH Network... | Answered on Jan 18, 2018 | 35 views

Why is the receiver being turned off . I never turned mine off just used the Tv on/off

DISH Network ViP... | Answered on Oct 26, 2017 | 135 views

Not finding what you are looking for?
DISH Network Logo

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides