GE Ovens - Answered Questions & Fixed Issues


GE Ovens | Answered on Nov 25, 2019 | 70 views

I am unsure whether you are asking for the control itself or the knob or ?
If you google for GE 169152 control part you will get some results, including some manuals. Once you find the part number of the part you are looking for, you can either look for that part online, or you should be able to find a local appliance part supply store/warehouse to get it from. I got a GE genuine temperatire control for my GE range last week from ReliableParts locally.

GE Ovens | Answered on Oct 24, 2019 | 50 views

This means that the Sabbath mode has been enabled. To disable the program, first press and release the Cancel/Off to stop the current programmed bake settings. Then press and hold Settings until Sabbath Mode Off is displayed. See page 14 of the manual for setting the Sabbath mode. The manual is available on the product page: . The current link to the manual is . Most GE oven codes are listed here: . The Sabbath Mode symbol is shown at the bottom of the table.

This mode can be used to set the oven temperature for an extended bake (usually for a low temperature) or a programmed bake. It's used by those who strictly keep the Sabbath but want a hot meal ready when the Sabbath ends.

I hope this helps.

Cindy Wells

GE Ovens | Answered on Oct 06, 2019 | 70 views

I have an FA code as well. Dont know what it is. Everytime it comes on I clear it and it comes back. Not using oven, just cook top

GE Profile JT955... | Answered on Sep 19, 2019 | 828 views

Two posters at the internet link above had suggestions. The following doesn't cost to try:

"Karl McHugh
  • 1 Post
  • 1 Reply Like
you guys are going to laugh at this. have this problem. my repair guy gave me a tip until I can figure out long bottom oven...there are vents at the top. use a flashlite and look in back right corner and you will see a squirrel cage fan. I taped together two long skewers to reach the back...insert through vent to squirrel cage fan and spin a few times. bingo...f code goes away and oven goes back to normal. don't want to do this long term but works until you get a solution. Ive been doing it for a month now but I travel all week and haven't had a chance to get it repaired. this has worked every time...seems like a dead spot in the drive for this???"

GE Ovens | Answered on Sep 09, 2019 | 66 views

GE Ovens | Answered on Aug 18, 2019 | 207 views

  • Open internal fuse
  • Magnetron failure
  • Control board failure
  • Door interlock failure

GE Ovens | Answered on Jul 12, 2019 | 155 views

Sometimes one must simply accept things as they are...

GE Ovens | Answered on Jun 24, 2019 | 68 views

I would not use this appliance and do one or both of the following:
Contact a Lawyer
Contact GE

GE Ovens | Answered on Apr 17, 2019 | 51 views


GE Ovens | Answered on Apr 06, 2019 | 74 views

This forum, as its name suggests ('Optics'), relates to telescopes, microscopes and binoculars (and also, some people seem to think, firearms). An oven is in none of those categories. Posting in a forum dealing with domestic equipment may produce more results.

GE Ovens | Answered on Mar 08, 2019 | 66 views

Could be the bake element is bad or oven sensor is bad or control board is bad

GE Ovens | Answered on Mar 05, 2019 | 85 views

There are elements in the oven too but I will assume you are referring to the stovetop elements only.

You did not give a model so I can't research any information, but it could be that a main connection has come loose under/behind, or a safety device (fuse) has tripped.
Before working on the stove, turn off the breaker you are dealing with 240 Volts and can be very dangerous.

One thing to test, try turning the breaker off and back on again and test the cooktops, otherwise turn the breaker back off before proceeding.

Some stove have screws under the front lip (maybe covered by the oven door) that with removal, allow the top to be lifted, otherwise you will need to pull away from the wall, disconnect power and access the back for further troubleshooting.

GE Ovens | Answered on Mar 04, 2019 | 65 views may have it in their parts listing for your model #.

GE Ovens | Answered on Mar 02, 2019 | 78 views

If you installed the oven without the door on, open the door completely, then turn the power off at the breaker, then go upstairs and shut the door and then go back downstairs and turn the power back on. if that doesn't work call for service.

GE Ovens | Answered on Jan 24, 2019 | 78 views

Not finding what you are looking for?
GE Logo

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers


Level 3 Expert

13434 Answers


Level 3 Expert

85222 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides